MP+

One-part, re-enterable intumescent putty stick for firestopping penetrations and blank openings, tested up to 4 hours.

CP 25WB+

One-component, latex-based intumescent firestop sealant tested for through-penetrations up to 4 hours.

IC 15WB+

Yellow one-part, latex-based intumescent firestop sealant tested for through-penetrations up to 3 hours.

Fire Barrier 2000+

Elastomeric, neutral-cure firestop sealant giving up to 4-hour fire protection and an acoustic barrier for construction joints.

3000 WT

Intumescent silicone elastomeric firestop sealant that is also water-tight, tested for through-penetrations up to 4 hours, suited to CPVC piping.

Hi-Strength 90

Fast-drying, high-strength contact-type spray adhesive that bonds laminate, wood, metal, plastic and fabric.

3764

Clear, fast-setting thermoplastic hot melt stick for bonding plastics including polyethylene and polypropylene, flexible at low temperature.

4000 UV

Medium-strength, UV-resistant, color-stable one-part marine sealant for portholes, deck fittings and rub rails that still allows disassembly.

4200FC

Fast-curing polyurethane marine sealant bonding wood, fiberglass, gelcoat, plastics and metal above and below the waterline.

DP100

Fast-curing, high-flow clear epoxy for general-purpose structural bonding with a 5-minute work life.

DP420

Toughened two-part epoxy with high impact and fatigue resistance for demanding structural bonds.

DP460

High-performance toughened epoxy with outstanding shear and peel strength for critical bonding applications.

DP8005

Two-part acrylic adhesive that bonds low surface energy plastics like polypropylene without surface prep.

2214 Hi-Temp New Formula

One-part, heat-curing, aluminium-filled modified epoxy paste for bonding metals and high-temperature plastics, -55°C to 177°C, fully cured in 60 minutes at 121°C.

DP100 Plus

Fast-setting, self-leveling two-part epoxy with high shear and peel strength that stays clear when cured.

DP105

Very flexible, fast-setting 1:1 two-part epoxy that cures clear for invisible bond lines, with 5-minute work life.

DP110 Gray

Flexible, fast-setting two-part 1:1 epoxy with 10-minute work life and handling strength in about 20 minutes.

DP125

Two-part epoxy for metal, ceramics, stone, wood and many plastics with up to 25 minutes of open time.

EC-2216 B/A

Flexible, room-temperature curing two-part epoxy for aerospace-grade bonding, usable at cryogenic temperatures.

DP270 Black

Two-part, 1:1, low-viscosity epoxy potting compound and adhesive for sealing and encapsulating electronic components, 70-minute work life, negligible exotherm, UL 94 HB.

DP490

Black, non-sag two-part epoxy structural adhesive with a 90-minute working time.

DP810

Toughened, low-odor, non-flammable 1:1 acrylic for bonding oily metals, plastics and composites with 10-minute work life.

DP8805NS

Two-part, toughened, low-odor and non-flammable 10:1 acrylic structural adhesive with a 3-5 minute work life and structural strength in 8-10 minutes.

EC-1300L

Fast-drying, solvent-based contact adhesive bonding rubber, fabric, foam, metal and wood veneer with high immediate strength.

EZ250030

One-component moisture-curing polyurethane reactive (PUR) adhesive with 120-second open time and 30-second set, 100% solids with no VOCs.

DP8010

Two-part acrylic adhesive bonding low surface energy plastics such as polypropylene and polyethylene without surface treatment.

DP640

Two-part, 1:1, non-sag urethane adhesive with tough, flexible bonds, a 40-minute work life, especially good on wood and abraded plastics.

Super 77

Fast-drying, aggressive-tack spray adhesive with high-solids content that bonds a wide range of lightweight materials.

Primer 94

Solvent-based adhesion promoter improving tape, film and vinyl graphics bonding to low-energy plastics and metals.

31624-AA

Fast-tack multi-purpose spray adhesive that bonds almost any material to most hard surfaces.

1004788

General-purpose clear RTV silicone for sealing, bonding and waterproofing, with a barely visible, water-tight seal.

14277

Ultra-fast-curing thixotropic epoxy gel that fills gaps and bonds metal, glass, ceramics and wood in seconds.

2 Ton Epoxy

Extremely strong, clear, water-resistant structural epoxy adhesive that self-levels and cures without shrinking.

5 Minute Epoxy

Rapid-curing, general-purpose two-part epoxy adhesive that bonds metals, glass, ceramics, concrete and wood.

3145

High-strength, non-flowing MIL-A-46146 RTV silicone adhesive/sealant for electronics and aerospace assembly, high tensile strength and elongation with enhanced thermal stability.

732

General-purpose acetoxy-cure RTV silicone sealant/adhesive for industrial sealing and bonding, stable from -60°C to +180°C with excellent dielectric properties.

Advanced Formulation

Solvent-free, non-setting gasket dressing and flange sealant, a mobile version of Universal Blue for close-fitting flanges.

Aerograde PL32

Rolls-Royce approved, NATO stock number non-setting gasket compound for aeronautical turbines.

M

Non-setting, non-hardening universal jointing compound, -50°C to +250°C, in three grades.

Universal Blue

Non-setting, non-hardening polyester urethane gasket compound resistant to fuels, oils and coolants from -50°C to +250°C.

Instant Gasket

Acetoxy curing engineering-grade RTV silicone sealant with large gap-filling properties.

221

Low-strength, low-viscosity threadlocker for small screws and long engagement fasteners.

222

Low-strength threadlocker for small fasteners that need to stay easily removable.

225

Medium-strength threadlocker for fasteners requiring normal disassembly with hand tools.

2400

Medium-strength threadlocker suited to stainless steel and plated fasteners.

242

Medium-strength threadlocker for general-purpose fastener locking, removable with hand tools.

243

Medium-strength threadlocker for securing and sealing threaded fasteners.

245

Medium-strength threadlocker for locking and sealing fasteners removable with hand tools.

246

Medium strength, thixotropic threadlocker for heavy duty fasteners exposed to elevated temperatures.

248

Medium-strength threadlocker in a no-drip stick applicator, no primer needed.

262

Medium-to-high strength threadlocker for permanent locking of large bolts and studs.

263

High-strength threadlocker for heavy-duty fasteners, oil-tolerant.

266

High-strength, high-temperature threadlocker for heavy-duty fasteners exposed to shock and vibration.

268

High-strength threadlocker in a no-drip stick applicator.

270

High-strength threadlocker for permanent locking of heavy-duty fasteners, oil-tolerant.

2700

High-strength, permanent threadlocker for fasteners that will not be disassembled.

2701

High-strength threadlocker for inactive substrates and hot-oil resistance.

271

High-strength threadlocker for permanent locking of fasteners up to 1 inch in diameter.

275

High-strength threadlocker for permanent locking of large bolts and studs (M25 and larger).

276

Fast-curing, high-strength threadlocker for permanent locking, minimal activator needed.

278

High-strength, high-temperature threadlocker for coated or plated fasteners.

290

Wicking-grade threadlocker that flows into pre-assembled fasteners without disassembly.

3090

Fast-curing, two-component gel adhesive that fills gaps up to 5 mm on plastics, rubbers and metals.

380

Low viscosity, rubber-toughened black instant adhesive for tight fitting parts with excellent impact strength.

401

Fast-curing cyanoacrylate instant adhesive for small parts and general bonding.

402

Fast-fixturing, high-temperature instant adhesive with strong humidity resistance.

403

Low-odor, low-bloom instant adhesive for applications where vapor control matters.

406

Low-viscosity instant adhesive for very fast fixturing on plastics and rubbers.

415

General purpose methyl cyanoacrylate instant adhesive, particularly suited to metal bonding.

416

General purpose ethyl cyanoacrylate instant adhesive for plastics, rubbers and metals.

4203

Elastomer-toughened instant adhesive with improved heat and humidity resistance.

4304

UV/visible light curing instant adhesive for very rapid fixturing and surface cure.

435

Rubber-toughened instant adhesive with higher flexibility, peel strength and shock resistance.

454

Gel-consistency instant adhesive that won't run on vertical surfaces.

460

Low odor, low blooming instant adhesive for metals, plastics and elastomers.

480

Rubber-toughened black instant adhesive with high peel and impact strength.

493

Very low viscosity methyl cyanoacrylate general purpose adhesive for metal substrates.

495

General-purpose, fast-fixturing instant adhesive for plastics, rubbers and metals.

496

Very low-viscosity instant adhesive particularly suited to bonding metal substrates.

510

High-temperature, chemical-resistant anaerobic flange sealant for close-fitting rigid metal flanges.

515

Form-in-place anaerobic flange sealant for rigid machined metal flanges in pumps, compressors and transmissions.

518

Anaerobic flange sealant for rigid, close-fitting metal flanges.

5188

Highly flexible anaerobic form-in-place gasket for rigid metal flanges, tolerant of minor oil contamination.

542

Fast-curing, medium-strength thread sealant for fine-threaded hydraulic and pneumatic fittings.

545

High-lubricity thread sealant for easy assembly of fine-threaded hydraulic and pneumatic fittings.

55

Polyamide thread sealing cord for an immediate, full-pressure seal on metal and plastic pipe threads.

561

Self-feeding applicator stick for sealing pre-torqued metal pipes and fittings; NSF/ANSI 61.

565

Controlled-torque strength thread sealant for an instant low-pressure seal on tapered metal pipe threads.

567

General-purpose, high-temperature thread sealant for an instant low-pressure seal on tapered metal pipe threads.

572

Medium strength, thixotropic paste sealant for metal pipes and fittings.

574

Instant-seal anaerobic flange sealant with high oil and water/glycol resistance for gearbox and engine casings.

577

Medium-strength, general-purpose thread sealant for straight-to-straight and straight-to-taper fittings.

592

High-temperature thread sealant rated to 204°C, for pipe threads and fittings up to 400°F.

601

Low viscosity, high strength anaerobic for bonding cylindrical fitting parts.

603

High-strength retaining compound for cylindrical parts where clean surfaces can't be assured.

609

High-strength retaining compound for bushings, sleeves and rotor-to-shaft assemblies.

620

High-temperature retaining compound for wider bond gaps, up to 232°C (450°F).

638

High-strength, oil-tolerant retaining compound for wider bond gaps.

641

Medium-strength retaining compound for cylindrical parts that require future disassembly.

648

High-strength, fast-curing retaining compound for gears, sprockets and rotors.

660

Gap-filling retaining compound paste for restoring worn shafts and bearing seats.

680

High-strength retaining compound for cylindrical parts, certified for potable water systems.

AA 326

2-step, no-mix acrylic adhesive with fast cure and 15 N/mm2 shear strength, ideal for magnet bonding.

AA 330

Multipurpose, no-mix structural acrylic adhesive for bonding dissimilar substrates including metals and plastics.

EA 3450

Two-component 1:1 epoxy that cures rapidly at room temperature; metal bonding and gap filling.

9460

Non-sag, thixotropic gray epoxy for bonding dissimilar substrates including metals and engineering thermoplastics.

EA 9466

Two-component, room-temperature curing epoxy with extended 60-minute working life and high peel strength.

EA E-00CL

Clear, fast-setting general purpose epoxy for structural bonding, potting and encapsulating.

EA E-05CL

Ultra-clear, toughened epoxy with excellent peel resistance and low shrinkage for structural bonding.

EA E-05MR

General-purpose, gap-filling clear epoxy adhesive for high-strength bonds on rough or poorly fitting surfaces.

EA E-120HP

High-viscosity epoxy with a 120-minute work life for peel- and impact-resistant structural bonding.

EA E-20HP

High impact- and humidity-resistant structural epoxy for demanding metal-to-metal and magnet bonding.

EA E-30CL

Ultra-clear, low-viscosity 2-part epoxy for potting, bonding and staking optical and electrical assemblies.

EA E-60HP

Toughened, extended work-life epoxy adhesive for general-purpose industrial structural bonding.

HY 4090

Fast-fixturing hybrid epoxy-cyanoacrylate adhesive combining speed and structural strength for gap-filling bonds.

SF 7387

Low-viscosity activator that initiates cure of Loctite toughened acrylic structural adhesives, including AA 330.

SF 7452

Acetone-based activator that accelerates cure of cyanoacrylate adhesives.

SF 7455

Colorless amine accelerator that speeds curing of Loctite cyanoacrylate adhesives, ideal for post-application.

SF 7471

Acetone-based cure activator for anaerobic adhesives, enhancing fixture speed on passive metals and inert surfaces.

SF 7649

Solvent-based activator that speeds cure of anaerobic adhesives and sealants on passive metals and in cold conditions.

SF 770

Adhesion promoter for bonding low-energy plastics like polypropylene and polyethylene with instant adhesives.

SI 5145

Non-corrosive, neutral-cure silicone for bonding, sealing and coating electronic devices from -50°C to 200°C.

SI 5331

NSF-registered acetoxy silicone thread sealant for plastic pipe fittings carrying hot or cold water.

SI 5366

Clear acetoxy RTV silicone for sealing, bonding and protection, up to 250°C.

SI 5699

Flexible, moisture-cure RTV silicone gasket maker with oil and water/glycol resistance for transmission flanges.

SI 5900

Heavy-bodied, moisture-cure RTV silicone flange sealant with excellent oil resistance and large gap fill.

SI 5920

High-temperature RTV silicone gasket maker rated to 350°C, for flexible flanges and electrical insulation.

SI 595

Clear, general-purpose RTV silicone sealant for flexible bonding and sealing up to 204°C.

SI 596

Red, flowable RTV silicone sealant rated to 316°C for furnaces, ovens, boilers and exhaust systems.

SI 5970

Black RTV silicone gasketing sealant with excellent engine oil resistance.

Anaerobic Gasket Maker

Medium-strength, thixotropic anaerobic gasket maker that cures between close-fitting aluminum surfaces, NSF White Book registered.

80019

Slow-drying, non-hardening brush-top sealant approved for aviation and automotive use.

68050

OEM-specified, high-strength, medium-viscosity anaerobic adhesive for slip-fit assemblies, 2,800 PSI shear strength on steel, fixtures in 10 minutes.

80050

General purpose, waterproof, flexible clear RTV sealant for indoor/outdoor use, -75°F to 400°F.

80697

Fast-drying metallic copper spray sealant that dissipates heat and fills surface imperfections; -50°F to 500°F.

80016

Slow-drying, non-hardening sealant for dressing cut gaskets, approved for aviation and automotive use.

56521

PTFE-containing thread sealant formulated for metal tapered pipe thread fittings; replaces Teflon tape and pipe dopes and cures rapidly to withstand up to 10,000 PSI.

80062

All-purpose, fast-drying brush-on sealant that dries to a highly tacky, non-brittle film and resists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane.

59235

PTFE-containing thread sealant that locks and seals fittings, repositionable up to 4 hours after application.

27240

High-temperature, high-strength red threadlocker for permanent locking of studs and press fits, adds 3,000 PSI holding power and suits temperatures up to 450°F (232°C).

27140

High strength threadlocker for heavy-duty 3/8" to 1" fasteners, studs and press fits.

24240

All-purpose medium strength threadlocker for 1/4" to 3/4" nuts and bolts, removable with hand tools.

27037

Maximum flex, maximum oil resistant RTV that peels off by hand, 15% stronger and 60% more flexible than Ultra Black.

29000

Low viscosity threadlocker that wicks along threads of preassembled fasteners after assembly.

80045

Universal sealant that lubricates and seals threaded joints on water, oil and fuel lines.

49450

Fast setting instant adhesive that forms a long-lasting, gap-filling bond on non-porous surfaces.

24163

Aerosol activator that speeds the cure of Permatex anaerobic threadlockers, thread sealants, retaining compounds and gasket makers by 50%, also a general-purpose cleaning solvent.

85224

Formed-in-place elastomeric gasket that fully cures in 1 minute, for high oil-resistance applications.

80632

Economical general-purpose fitting sealant that outperforms tapes and pipe dopes.

Ultra Black

Sensor-safe RTV silicone gasket maker with improved oil resistance for oil pans, transmission pans and valve covers.

81878

High-temperature RTV gasket maker for turbocharger and exhaust applications, resists up to 700°F.

Ultra Grey

High-load, sensor-safe RTV silicone gasket maker for closely-spaced bolt patterns and OEM applications.

81630

Low-odor, sensor-safe RTV silicone gasket maker resisting temperatures up to 650°F for exhaust and high-heat applications.

22071

Coolant-resistant, sensor-safe RTV silicone formulated specifically for water pumps and thermostat housings.

81731

High-strength, waterproof yellow adhesive bonding rubber, metal, carpeting and vinyl upholstery, repositionable after installation.

Fix ALL High Tack

High-tack, neutral-cure SMX hybrid polymer adhesive/sealant with very high initial grab and up to 320 kg/10cm² end strength, reducing the need for support or clamping.

Silirub 2

Low-modulus, neutral-cure silicone joint sealant with excellent UV resistance and very high movement capability (±25%), for glazing and expansion joints.

TB1207B

Acetone-cure, black RTV silicone liquid gasket for powertrain and flange sealing, resistant to vibration, heat and automotive fluids.

TB1215

Oxime-cure, grey RTV silicone liquid gasket with high pressure resistance for powertrain and flange sealing.

Aluminium Minute Adhesive

Fast-curing, aluminium-filled structural epoxy adhesive for bonding aluminium and light metals, machinable after cure.

Black-Seal Special Silicone

High-temperature, oil- and grease-resistant black RTV silicone sealant, resistant to +280°C, for gearbox and engine sealing.

10016400

Black rubber-filled, high-viscosity, slow-curing instant adhesive with residual elasticity, resistant from -55°C to +140°C.

10019803

High-viscosity, slow-curing instant adhesive with residual elasticity, resistant from -55°C to +140°C, in a pen dosing system.

10031972

High-strength, extremely fast-curing, high-viscosity 1:1 polyurethane structural adhesive with a 90-second pot life, -55°C to +125°C, black.

10047457

Fast-curing 1:1 MMA structural adhesive that bonds low surface energy plastics such as PE and PP and EPDM, with 8-minute pot life.

10057686

Two-component epoxy resin adhesive resistant to +180°C, self-levelling with a very short pot life.

Flex 310 M

Silicone-free, ISEGA-certified elastic adhesive and sealant based on MS polymer for universal bonding.

10012994

Strong, permanently elastic 1C MS-polymer adhesive and sealant, free of silicone, isocyanate and solvents, -40°C to +90°C, ISEGA-certified for food technology.

10105067

Permanently elastic special sealant curing with air humidity, practically without shrinkage, in an eco-friendly cardboard Green Tube cartridge.

10005243

Red acetoxy-curing silicone sealant and adhesive for heat-exposed bonds and seals up to +300°C.

10026655

Patented 100% PTFE thread sealing cord for metal and plastic threads, -200°C to +240°C, non-flammable; one 175 m roll replaces up to 20 rolls of PTFE tape.

10047481

Water-based, non-hazardous, VOC-free lacquer for threadlocking, marking and sealing of screw connections, -80°C to +120°C, in red, yellow and green.

10016512

Moisture-resistant, high-viscosity alkoxy cyanoacrylate with longer curing time, odourless and little to no blooming, for clean, visually appealing bonds.

10031783

High-viscosity, medium-strength white anaerobic pipe and flange sealant with PTFE, classified as non-hazardous, with drinking-water approval, -60°C to +150°C.

10016416

Low-strength, low-viscosity violet threadlocker for easy disassembly, classified as non-hazardous, in a dosing pen.

10019968

Medium-strength, higher-viscosity blue anaerobic threadlocker for threads up to M36, -60°C to +200°C, with DVGW and drinking-water approvals; removable with normal tools.

AN 305-18

High-viscosity anaerobic flange sealant for filling large gaps with immediate sealing effect.

AN 306-41

Medium-strength, medium-viscosity anaerobic retaining compound for bearings, shafts and bushings, disassembles with normal tools.

10034150

High-strength, high-viscosity silver retaining compound for worn bearing rings and bushings, gap bridging up to 0.5 mm, -60°C to +150°C.

31585-AA

NSF H1 translucent NLGI 2 silicone grease for bearings up to +220°C.

Assembly Paste FG

NSF H1-registered start-up lubricant and anti-seize paste that reduces wear during running-in and prevents thread seizure.

30245-AA

NSF H1 food-grade chain lubricant for -15 to +175°C.

31575-AA

Chain and drive lubricant spray with maximum adhesion to the chain link, excellent penetration and corrosion protection; up to 200°C continuous.

30239-AA

High-temperature copper anti-seize paste, -30 to +1,100°C, lead and nickel free.

31576-AA

Resin-bonded dry MoS2 lubricant film for high-load applications, -150 to +400°C.

30274-AA

NSF H1 registered synthetic PAO gear oil, ISO 220, for food and beverage gearboxes with extended service intervals.

31966-AA

NSF H1 white aluminium-complex NLGI 2 grease for heavily loaded bearings.

30267-AA

NSF H1 registered synthetic PAO hydraulic fluid, ISO 46, for food and beverage sector use.

32454-AA

NSF registered high purity silicone release agent for food and beverage packaging and moulding, up to +200°C.

31582-AA

Foaming metal cutting lubricant that clings to vertical surfaces.

31580-AA

Ready-to-use metal cutting lubricant liquid with extreme-pressure additives, in a 350 ml applicator bottle.

31581-AA

Traditional metal cutting paste with the performance of Tufcut liquid.

31579-AA

Ready-to-use metal cutting lubricant spray with extreme-pressure additives for tough metals; NSF H2 registered.

610 Plus

Premium full-synthetic polyolester lubricating fluid for equipment operating from -25°C to over 270°C, self-cleaning and non-carbonizing where petroleum lubricants fail.

725(E)

Colloidal nickel, aluminium and graphite assembly compound withstanding temperatures up to 1425°C, guards against galling, corrosion and galvanic pitting between dissimilar metals.

05012

High-performance synthetic chain and open-gear lubricant that sprays on like a liquid, penetrates deep, then sets up like a grease for outstanding load-bearing protection.

1004830

General-purpose, electrically conductive copper anti-seize preventing seizing from high temperature, load, vibration and corrosion.

1003199

Non-curing silicone compound for sealing, lubricating, protecting and insulating electrical connections; NSF H1 registered.

1007959

Tacky, extreme-pressure lithium complex grease for drilling, mining and heavy-duty equipment, wet-environment rated.

1003302

Micro-thin, dry non-tacky ceramic film lubricant for metal, wood, rubber, plastic and glass, working -40°F to 450°F, NSF H2 registered.

1003362

Dry, non-petroleum graphite film lubricant for metal and rubber that handles 25,000 psi and 400°F continuous (850°F intermittent).

1003351

Molybdenum disulfide dry-film lubricant that withstands 50,000 psi and continuous temperatures up to 600°F (800°F intermittent).

1003318

Black moly-graphite tacky lubricant for exposed chains, open gears and wire ropes, effective from -25°F to 350°F.

1003313

NSF H1 registered aerosol chain lubricant, a blend of synthetic lubricants and mineral oil with anti-wear properties for roller and conveyor chains.

1003353

NSF H1-registered, non-curing silicone compound for sealing, lubricating and insulating electrical connections in food environments.

1003343

NSF H1 registered, silicone-free general-purpose food grade machine oil that loosens rust and corrosion, with zero VOC and a Perma-Lock actuator.

1003292

NSF H1 registered NLGI 2 white aerosol grease for heavy-load applications, resisting throw-off, water, salt spray and detergent.

1007931

NSF H1 registered, NLGI #2 high-performance grease with extreme-pressure and corrosion resistance for food plant machinery, -20°F to 400°F.

1007946

Copper-, lead- and chloride-free nickel anti-seize protecting parts up to 2400°F while remaining electrically conductive.

SL35610

NSF H1 registered NLGI 2 synthetic grease with a very high dropping point, for food processing equipment.

05037

Water- and heat-resistant white lithium grease with rust and oxidation inhibitors for metal-to-metal contact points.

CASSIDA CHAIN OIL 150

NSF H1 fully synthetic anti-wear chain oil for food and beverage processing equipment.

CASSIDA FLUID HF

NSF H1 synthetic hydraulic fluid series (15, 32, 46, 68, 100) for food manufacturing machinery.

CASSIDA GREASE HDS 2

NSF H1-registered synthetic heavy-duty grease for food and beverage processing equipment with excellent wash-out resistance.

RENEP KN 68 & 220 NA

Tackified EP slideway/gear lubricant with excellent stick-slip friction control for machine tools and headers.

RENOLIN B PLUS

Premium AW/EP hydraulic fluid and lubricating oil formulated on hydrotreated base oils, exceeding DIN 51524-2 HLP/HM requirements.

RENOLIT CX-EP 2

Calcium complex soap grease with excellent water and salt water resistance for high thermal and mechanical loads.

RENOLIT LX 2

EP high-temperature multipurpose grease based on lithium complex soap for long-term lubrication.

TITAN SUPERGEAR SAE 80W-90

Mineral universal gear oil for manual transmissions and axle gearboxes, API GL-4/GL-5.

L 55/2

PFPE-based high-temperature long-term grease (NLGI 2) for bearings and guides operating up to 260°C, resistant to aggressive chemicals; NSF H1 registered.

004131

Synthetic hydrocarbon grease with a barium complex soap for high-speed, high-load bearings, low temperatures and precision gears, -50°C to +120°C.

020269

Heavy-duty extreme-pressure lithium grease for highly loaded rolling bearings at low to medium speeds, up to 140°C.

BEM 41-132

Long-term lithium-soap grease (synthetic hydrocarbon + mineral oil) for rolling bearings at temperatures up to 150°C.

BEM 41-141

Lithium-soap grease (NLGI 1) for rolling and plain bearings subject to high loads and vibration, especially wind turbine rotor, generator and pitch bearings.

094023

High-purity synthetic ester/polyurea grease for low-noise, long-life ball bearings from -40°C to +180°C.

LB 8008

General-purpose copper and graphite anti-seize lubricant for fasteners exposed to extreme heat.

LB 8009

Metal-free anti-seize lubricant protecting fasteners from corrosion and seizure up to 1315°C.

LB 8012

Molybdenum disulfide anti-seize lubricant for threaded fasteners during running-in periods.

LB 8014

NSF H1 registered, metal-free anti-seize lubricant safe for incidental food contact areas.

LB 8023

ABS-approved, metal-free marine anti-seize resisting salt water wash-out and galvanic corrosion.

LB 8060

Heavy-duty, high-temperature silver anti-seize lubricant stick, typically up to 870°C.

LB 8065

Copper-colored, stick-form anti-seize lubricant for spill-free application at temperatures up to 982°C.

LB 8101

Amber, water-resistant lubricant for open chains, gears, worm screws and cables under heavy load.

LB 8102

High-temperature EP grease for rolling and plain bearings, gears and slideways under heavy load.

LB 8103

Black MoS2 grease for heavy-load, vibration-prone bearings and joints up to 250°C.

LB 8104

NSF H1 registered, colorless silicone grease for lubricating plastic and elastomer components in food processing equipment.

LB 8150

Silver-grade anti-seize paste with graphite, aluminum and extreme pressure additives, rated to 900°C.

LB 8151

Anti-seize spray for threaded connections exposed to high temperatures, -30 to +900°C.

Copper Anti-Seize

Heavy-duty, non-melting copper anti-seize paste for extreme temperatures up to 2,000°F.

DTE 10 Excel 46

High performance zinc-free anti-wear hydraulic oil (ISO VG 46) with synthetic base oils and a viscosity index of 163.

Mobil SHC Cibus 46

NSF H1 registered synthetic hydraulic, circulating, compressor and gear oil (ISO VG 46) for food and beverage processing and packaging equipment.

Vactra Oil No. 2

ISO VG 68 slideway lubricant for precision machine tools that eliminates stick-slip and separates from aqueous coolants.

Mobilgear 600 XP 220

ISO VG 220 extra high-performance gear oil with outstanding extreme-pressure and load-carrying properties for enclosed industrial and marine gear drives.

Mobilgrease XHP 222

Extended-service lithium complex grease (NLGI 2, ISO VG 220 base oil) with superb water resistance for industrial and marine equipment.

Mobilux EP 2

General-purpose lithium hydroxystearate EP grease (NLGI 2) protecting against wear, rust and water washout.

1000 Paste

Lead- and nickel-free anti-seize paste for threaded fasteners exposed to high temperatures up to 650°C.

111 Compound

Silicone-based valve and O-ring lubricant/sealant with a wide service temperature range and multiple drinking-water approvals.

316

Heat-stable silicone anti-stick agent, FDA 21 CFR 175.300 compliant, for food, rubber and machinery release applications.

33 Medium

Silicone-based, lithium-thickened NLGI 2 grease for light-load metal-to-metal and metal-to-plastic friction over a very wide temperature range, from -73°C.

3451

Fluorosilicone/PTFE grease resisting chemicals, solvents and water, for sealed-for-life bearings from -40°C to 232°C.

3452

Fluorosilicone grease resistant to solvents, acids and chlorides, for -29°C to +232°C service.

4 Electrical Insulating Compound

Silicone dielectric compound with semi-flowable consistency for sealing connectors, terminals and battery contacts; -54°C to +200°C.

41

Carbon-black-thickened silicone grease that does not melt even at extreme temperatures; -20°C to +290°C.

44 Medium

Silicone-based lithium grease for high-temperature bearings, low evaporation and superior oxidation resistance; -40°C to +204°C.

55 O-Ring Grease

Silicone-based lithium grease that seals and lubricates rubber O-rings and seals by slightly swelling them; -65°C to +175°C.

AS-880N

Silicone/silica grease with solid lubricants for brake noise and vibration damping between metal, plastic and shim surfaces.

BG-20

High-performance synthetic grease for metal/metal bearings with rapid movement and medium to heavy loads.

BR2 Plus

Premium lithium soap grease with solid lubricants for metal-on-metal friction under heavy loads.

Cu-7439 Plus Paste V1

Copper anti-seize paste for high loads, high temperatures and corrosive environments, from -30°C to +650°C, for trouble-free disassembly.

D-321 R Spray

Air-curing dry-film lubricant in aerosol form with molybdenum disulfide and graphite for heavily loaded metal-to-metal sliding contacts, from -180°C to +450°C.

G-4700

PAO-based synthetic EP grease with molybdenum disulfide, lithium complex thickened, for extreme loads, shock and vibration.

G-N Plus

High-temperature solid lubricant paste for press-fit assembly, running-in and anti-seize protection of metal components.

G-Rapid Plus Paste

Solid lubricant paste with very low friction coefficient for assembly and running-in of metal components; -35°C to +450°C.

HP-300

Fully fluorinated PFPE grease for extreme, oxygen-rich or corrosive conditions, including hydrogen-exposed and cleanroom equipment.

HSC Plus Paste

Lead- and nickel-free solid lubricant anti-seize paste for bolted joints and flanges, usable from -30°C to +1,100°C.

Longterm 2 Plus

Lithium-soap EP bearing grease with solid lubricants for long-term lubrication of highly loaded metal-to-metal contacts, protecting against fretting corrosion.

Longterm 2/78 G

Mineral oil lithium/zinc grease with solid lubricants and oxidation/corrosion inhibitors for long-term bearing and gear lubrication.

Multilub

Lithium mineral-oil grease (NLGI 2) for metal-to-metal contacts at slow to fast movement and medium to high loads; -25°C to +120°C.

P-37 Paste

Extremely pure solid lubricant paste for bolted joints, free of lead, nickel, sulfur, chlorine and fluorine, usable up to +1,400°C.

PG-54

Silicone oil based grease with a wide temperature range for long-term lubrication of plastic and rubber parts.

TP-42

White-solids mineral oil paste for metallic friction combinations, resistant to washout by water and machining emulsions.

U

High-MoS2 polyalkylene glycol paste for high-temperature assembly, O-rings and shaft protection up to 350°C.

1110

Transparent NLGI 3 silicone grease with NSF H1 and drinking-water approvals.

1140

Black NLGI 2 phenylmethyl-silicone grease for -20 to +290°C.

220

Black MoS2 lubricating paste for -35 to +450°C.

235

Silver aluminium anti-seize paste; separating film up to +1,100°C.

250

High-temperature ceramic-based assembly paste for lubricating heavily loaded sliding surfaces, threaded and bayonet connections; metal-free and NSF H2 registered.

3570

NSF H1 synthetic ISO VG 320 chain oil for -10 to +250°C.

410

NLGI 2 high-pressure long-life grease with MoS₂ for lubrication points subjected to pressure or impacts, including outdoor exposure.

80078

Aluminium, copper and graphite anti-seize lubricant, -60°F to 1,600°F, ideal for marine use.

24125

100% synthetic brake lubricant with ceramic solids that silences brake noise across a wide temperature range and will not wash out.

80075

Foaming chain lubricant that cleans, lubricates and protects roller chains, gears and cables.

09128

Premium copper anti-seize and thread lubricant with micro-fine copper flakes in a semi-synthetic grease, for high-temperature seizing, corrosion and galling, -30°F to 1800°F.

22058

Dielectric grease that protects electrical connections and spark plug boots from moisture and corrosion.

77124

High-temperature nickel anti-seize for stainless steel and titanium, protecting up to 2,400°F.

24112

Premium non-melting silicone brake lubricant fortified with ceramic solids that reduces noisy stops by 99% from -50°F to 3000°F.

24110

Green, non-melting, environmentally friendly 100% synthetic caliper lubricant that prevents seizing and squealing from -40°F to 400°F.

81950

Adhesive assembly lube that prevents scuffing and galling at initial start-up of new or rebuilt engines.

80345

All-purpose white grease that minimises friction in metal-to-metal and metal-to-plastic contact while protecting against rust.

ANTI-SEIZE Compound

Copper-based anti-seize paste reinforced with graphite and molybdenum disulphide, for static fasteners and mechanisms in extreme wet and corrosive conditions.

15120

Low-viscosity NSF H1 synthetic multi-purpose lubricant for food plants.

FOODLUBE Multi-Paste

Food-grade, non-toxic, multipurpose anti-seize and lubricating paste for threads, bushes, slides and small open gears in food and pharmaceutical environments.

15710

NSF H1 registered ester-based food-grade lubricant spray.

RTD Compound

Extreme-pressure cutting, tapping and drilling compound in paste form.

SAPPHIRE Hi-Load 2

NLGI 2 multi-complex, MoS2-containing extreme-pressure grease for heavily loaded bearings.

Corena S3 R 46

Premium mineral rotary air compressor oil (ISO VG 46) for sliding vane and screw compressors, with oil intervals up to 4,000 hours.

Gadus S2 V220 2

High-performance multipurpose extreme-pressure lithium grease (NLGI 2) for rolling and plain bearings, hinges and sliding surfaces across industrial and transport sectors.

Gadus S3 V220C 2

Premium multipurpose red lithium complex EP grease for high-temperature, heavily loaded bearings (NLGI 2, dropping point 260°C).

Omala S2 GX 220

High performing EP industrial gear oil (ISO VG 220) with long oil life and high micropitting resistance for heavy duty gearboxes.

Tellus S2 M 46

ISO VG 46 mineral-based anti-wear hydraulic fluid (ISO HM) with proven zinc-based anti-wear additives for industrial and mobile hydraulic power systems.

Tellus S2 V 46

High viscosity index hydraulic fluid (ISO VG 46, HVLP) for mobile and exterior equipment across wide temperature ranges.

LGAF 3E

Smooth lithium-soap paste that prevents fretting corrosion from slight oscillation or vibration, easing bearing and component removal.

LGED 2

NSF H1 certified PTFE-thickened fluorinated grease for extreme temperatures up to 240°C and aggressive chemical environments.

LGEM 2

Lithium/calcium grease with molybdenum disulphide and graphite for harsh, high-load, slow-rotation applications like crushers and cranes.

LGEP 2

Mineral oil, lithium soap grease with extreme pressure additives for harsh, high-load bearing applications.

LGET 2

PTFE-thickened fluorinated (PFPE) grease for extremely high temperatures from 200°C up to 260°C in aggressive environments.

LGEV 2

Lithium-calcium grease with molybdenum disulphide, graphite and extremely high viscosity oil for heavy loads, slow rotation and vibration.

LGFG 2

NSF ISO 21469 registered food-grade grease with complex calcium sulphonate thickener, -30°C to +140°C.

LGFQ 2

NSF H1, Halal and Kosher certified synthetic grease for high loads and wet, fluctuating-temperature food and beverage environments.

LGGB 2

Environmentally acceptable lubricant (EAL) with lithium/calcium thickener and ester base oil, -40°C to +90°C.

LGHB 2

Calcium sulphonate complex grease for extreme loads and peak temperatures up to 200°C, widely used in cement, mining and steel.

LGHC 2

Calcium sulphonate complex grease for high loads, heavy water exposure and high temperatures in cement, mining and metals.

LGHP 2

Polyurea-thickened mineral oil grease for extremely long life at high temperatures in electric motors and industrial fans.

LGHQ 2

Mineral-oil di-urea grease built for electric motors and single-point lubricators, with excellent dispensability and long grease life.

LGLT 2

Fully synthetic (PAO) lithium grease for low temperatures down to -50°C and extremely high speeds, with low friction torque and quiet running.

LGMT 2

Premium mineral oil lithium soap grease with excellent thermal stability for general-purpose industrial and automotive bearings.

LGMT 3

Premium lithium soap mineral-oil grease in NLGI grade 3 for applications that need a stiff grease, from large bearings to vertical shafts.

LGWA 2

Premium lithium complex EP grease for loads or temperatures beyond general purpose greases, from -30°C to +140°C.

LGWM 1

Low-consistency lithium soap grease with EP additives for wind turbine main shafts and heavy-duty bearings.

LGWM 2

Synthetic-mineral calcium sulphonate complex grease for high loads, wet environments and fluctuating temperatures.

10016777

NSF H2 registered white NLGI 2 lithium grease for roller and slide bearings, joints, spindles and open gears in food industry equipment, -30°C to +120°C.

AL-H

NSF H1-approved, odourless food-grade grease for bearings, joints and linear guide systems.

10016735

Long-life NLGI 2 lithium/calcium grease with MoS2 and high adhesive strength for roller and slide bearings, open gears and worm gears.

10018599

High-temperature long-term grease (NLGI 2) for roller and slide bearings, joints and spindles up to +190°C.

10016750

Special calcium-soap grease for sea water, waste water and underwater applications, with MIL-PRF-85336B / 24139A conformity.

10029748

Grease-free dry lubricant film with MoS2 for clean sliding lubrication from -200°C to +450°C.

Anti-Seize

High-temperature assembly paste that protects against corrosion, seizing, wear and cold welding, usable from -180°C to +1,200°C.

10000208

Metal-free and silicone-free white ceramic assembly paste for -40°C to +1400°C, compatible with stainless steel and nickel alloys.

10030351

Metal-free white assembly paste for corrosion protection and anti-seize on heavily stressed screw connections, -60°C to +1,400°C, NSF H1 registered.

10000187

Nickel-based assembly paste for extreme conditions from -30°C to +1450°C, protecting against seizing, corrosion and cold-welding.

10000155

Synthetic transparent adhesive lubricant for permanent internal and external lubrication of chains and wire ropes.

10000950

Copper-based protection, release and lubricating paste for highly stressed parts in high-temperature applications.

10053516

Mineral-oil-free, silicone-free high-performance cutting oil for drilling, turning, milling, sawing and thread cutting of steel, stainless steel and non-ferrous metals.

10000365

Water-clear, odourless medicinal white oil for lubrication and care in food, beverage, pharmaceutical and cosmetics plants, NSF H1 registered, -25°C to +120°C.

10010554

High-performance PTFE-containing lubricating oil for pneumatic tools and equipment, with corrosion protection, from -50°C to +210°C.

10062501

NSF H1-registered, plastic-compatible silicone grease with drinking water approval for valves, fittings and seals.

10000156

Synthetic, transparent adhesive lubricant with high adhesive strength and capillary action, -40°C to +200°C.

10039117

NSF H2-registered adhesive lubricant for the food, pharmaceutical and cosmetics sectors with strong adhesion and capillary action.

10019872

High-pressure-resistant long-term lubricant with MoS2 for bearings, joints and open gears, -20 to +120°C.

HHS 2000

Highly adhesive semi-synthetic high-pressure lubricating oil with strong capillary/creeping action, for hinges, linkages, Bowden cables and other hard-to-reach moving parts.

Non-ionic 35% active medium-viscosity PDMS emulsion for shell mold and core release, plastic and rubber parts, and polyurethane foam release.

Anionic 35% active silicone release agent emulsion of high-viscosity PDMS for rubber molding and foundry shell molds and cores.

35% actives non-ionic PDMS emulsion for rubber and plastic mold release, rubber and conveyor lubrication, textile lubrication and polishes.

60% active, ready-to-use non-ionic silicone emulsion of trimethylsilyl-terminated PDMS for general-purpose mold and web release.

Non-ionic 60% active emulsion of silanol-terminated polydimethylsiloxane for high-temperature mold release on plastics, metals and asphalt.

60% actives non-ionic polydimethylsiloxane emulsion for mold release, rubber and textile lubrication, and tire, vinyl and furniture care.

Zero-VOC industrial release agent and lubricant emulsion that protects fourdrinier wire from abrasion in paper making and also releases molds.

100% active, 1,000 cSt polydimethylsiloxane fluid with service temperature -40°C to +200°C for polishes, lubrication and mold release.

100% active, 100 cSt polydimethylsiloxane (dimethicone) fluid with pour point -65°C for polishes, lubrication, insulation and mold release.

100% active, 12,500 cSt high-viscosity polydimethylsiloxane fluid for damping, lubrication, coatings additive and mold release, -40°C to +200°C.

100% active, clear, food-grade 350 cSt polydimethylsiloxane fluid for food processing and packaging and edible oil processing.

100% active, 50 cSt polydimethylsiloxane (dimethicone) fluid for polishes, lubrication, electrical insulation, foam control and mold release.

Ambertron

Fast-evaporating electronic cleaning solvent that does not frost, preventing condensation on precision electrical contacts.

30257-AA

NSF H1 registered adhesive belt lubricant that improves grip and reduces squeak on all belt types.

30282-AA

Automotive solvent cleaner for brakes and clutches; also a general purpose degreaser.

32504-AA

Economical non-safety-critical duster with a powerful air blast for delicate electronics.

30287-AA

Biodegradable, non-silicone anti-spatter spray that stops weld spatter sticking to metal surfaces.

32499-AA

High purity dry graphite lubricant and release agent developed for glass-blowing mould pre-treatment.

33174-AA

Solvent-free professional workshop hand cleaner with biodegradable micro-abrasives and citrus cleaning power.

30251-AA

Heavy duty fast-evaporating solvent degreaser for food and beverage plants; NSF A8 and K1.

31633

Non-flammable, water-based spray that shows gas and air leaks as bubbles at the exact leak point.

31615-AA

Light multi-purpose lubricant, penetrant, anti-corrosion and dewatering spray.

30240-AA

Penetrant that frees fasteners seized by corrosion, heat or over-tightening.

31578-AA

Penetrant with freeze-shock action for seized and corroded fasteners.

30248-AA

NSF H1 registered silicone lubricant with a dry film, -40 to +200°C.

31631-AA

General purpose silicone lubricant, WRAS approved, -50 to +200°C.

31617-AA

Multi-purpose white grease in an aerosol for hinges, runners and guides.

02005

Plastic-safe lubricant, penetrant and corrosion inhibitor for electrical and industrial equipment that drives out moisture; NSF H2.

03005

Petroleum-based multi-purpose lubricant that displaces moisture, prevents corrosion and loosens frozen parts, leaving no sticky residue; NSF H2.

06006

Multi-purpose lubricant that resists water and salt spray and clears moisture behind electrical failures and hard starting.

1004997

Water-based, non-flammable, odourless aerosol leak detector for quick on-site detection of gas and air leaks, with no oils, silicones or harmful solvents, NSF P1 registered.

1003435

Water-soluble aerosol that removes corrosion, neutralises acid spills and restores battery output.

05089

Original non-flammable brake parts cleaner: a fast-drying solvent that removes contaminants without residue.

1003234

Non-chlorinated, non-conductive splice and termination cleaner with a high flash point of 204°F and 45,700 V dielectric strength, an alternative to chlorinated cable cleaners.

05002

Freeze-shock-action penetrant that drops surface temperature to crack rust for deeper, faster penetration on corroded nuts, bolts, hinges and locks.

03095

General-purpose, fast-evaporating degreaser with no flash or fire point that leaves no residue; NSF K1 registered for meat and poultry plants.

Heavy Duty Silicone Lubricant

Clear, water-resistant silicone lubricant spray that eliminates squeaking and binding on nylon, rubber and metal.

02018

Non-flammable heavy-duty degreaser for energized electrical equipment with no flash point and very fast evaporation.

1003421

Non-chlorinated, fast-evaporating heavy-duty aerosol degreaser that removes oil and grease and leaves no residue, non-conductive (6,600 V), NSF K1 registered.

05006

Petroleum-based industrial lubricant and fast penetrant that frees seized parts, displaces corrosion and stops squeaks; NSF H2 aerosols.

QD Contact Cleaner

Fast-evaporating, non-conductive, residue-free contact cleaner for sensitive electronics, NSF K2 registered.

1003488

General-purpose, medium-duty (3.5% silicone) mold release for fast, easy part removal from cold and hot molds, 35°F to 600°F working temperature.

1003349

Water-based, silicone-free anti-spatter spray that stops weld spatter sticking to metal surfaces and prevents flash rust.

LB 8040

Shock-freezing mineral oil spray that frees rusted, corroded and seized parts.

SF 7039

Solvent spray for cleaning electrical contacts exposed to moisture, leaving a protective water-repellent residue.

LPS 1

Dry-film penetrating lubricant and moisture-displacing spray that loosens rusted or frozen parts and is safe on paint, fabric and most plastics; NSF H2 registered.

LPS 2

Multi-purpose lubricant and penetrant with corrosion protection lasting up to one year indoors.

LPS 3

Wax-based, self-healing corrosion inhibitor preventing rust for up to 9 months outdoors and 2 years indoors; NSF H2 registered.

Electro

Plastic-safe, non-flammable contact cleaner that removes contaminants from electronic equipment.

Heavy-Duty Silicone

NSF H1 water-based silicone lubricant that eliminates sticking, binding and squeaking on plastic and rubber parts.

NoFlash 2.0

Non-flammable industrial-strength electronic cleaner safe on or near energized equipment.

TKX

Multi-purpose lubricant that penetrates small crevices, displaces moisture and loosens frozen parts; sprays at any angle.

82588

Fast-evaporating, noncorrosive cleaner for electrical and electronic devices that leaves no residue and is safe on all metals and most plastics.

82450

Non-chlorinated aerosol cleaner that penetrates, dissolves and removes dirt and oil from brake systems and metal parts, leaving no residue.

80070

High-silicone, non-gumming spray that lubricates and waterproofs mechanical equipment, stops squeaks and protects rubber, plastic and metal.

80052

Heavy-duty penetrating oil that works quickly to loosen rust, tar, grease, carbon deposits and corrosion and free frozen nuts, bolts and fittings.

53011

Aerosol extreme-pressure cutting and tapping lubricant.

10052243

Strongly adhesive, paintable sprayable plastic for sealing thin cracks and seams indoors and outdoors, from -50°C to +100°C.

10000160

Silicone-free transparent protective film that stops welding spatter adhering to nozzles and workpieces.

10031504

Transparent synthetic-elastomer belt coating that prevents belt slip and squeaking on drive belts.

10101770

Acetone-free universal cleaner and degreaser for brakes, clutches and engine parts that evaporates without residue.

10060673

Ready-to-use, fast-drying, non-flammable special cleaner classified as non-hazardous, free of silicone defoamers and non-greasy.

10027273

Protective spray that repels moisture, prevents leakage currents and keeps electrical contacts free of oxidation.

Electro Contact Cleaner

Fast-drying, residue-free cleaner for degreasing electrical and electronic components and contacts.

10028235

Silicone-free lubricating and care oil for window, door and gate fittings.

10002904

Foam-forming, DIN-DVGW-tested leak detector for fast, reliable location of leaks in pressurised pipes.

10016338

Solvent-free, NSF-registered care and protection emulsion that cleans, maintains and protects metal, ceramic, wood, glass and plastic.

10000154

Silicone-free sliding and release agent for plastics processing, moulds, metals and tools.

10000151

Grease-free dry lubricant based on PTFE with excellent sliding properties.

10023536

Six-function creep and care oil that loosens rust, displaces water and protects electrical contacts.

Silicone Spray

NSF H1-approved silicone lubricant and release agent for plastic, rubber and metal, temperature-resistant to +250°C.

10007039

Multi-purpose sprayable grease with strong adhesion and ageing resistance, temperature-stable from -20°C to +150°C.

10030465

Cold-start spray for diesel and petrol engines, sprayed into the air intake so no choke is needed, for vehicles, machinery and small engines.

10016798

Highly concentrated solvent-free, phosphate-free universal cleaner and degreaser, dilutable up to 1:40 and compatible with oil separators.

0890108700

Acetone-free hydrocarbon-solvent aerosol cleaner for degreasing brake and clutch parts, fast-evaporating and residue-free.

10% active food-grade silicone antifoam emulsion for fermentation, high-sugar systems, vegetable processing and beverages.

10% active water-dilutable silicone antifoam emulsion for cooling towers, fermentation, latex-concrete, detergents and crop protection.

30% active silicone antifoam emulsion for aqueous systems over wide pH ranges, including amine and carbonate gas scrubbing and glycol gas drying.

10% active water-dilutable silicone antifoam emulsion for textiles, water treatment, chemical scrubbing, agrochemicals and boiler systems.

20% active food-grade silicone antifoam emulsion for hot and cold aqueous systems, with food-contact, Halal and Kosher status listed by Dow.

2290

Solvent-based heat-cure epoxy coating for metal-to-metal lamination bonding with exceptionally high shear strength.

30291-AA

Zinc-rich protective coating spray for cold galvanising.

32379-AA

Fast-drying acrylic primer for repair and touch-up of painted surfaces with high UV resistance once cured.

31972-AA

Light green protective coating for mould tools that resists moisture, humidity and acid finger marking.

30298-AA

Multi-purpose zinc phosphate metal primer that promotes top-coat adhesion.

1111

Machinable, engineering-grade epoxy metal repair composite reinforced with silicon steel alloy, NSF/ANSI 61 certified.

1321

Non-machineable ceramic-filled epoxy resurfacing coating for metal surfaces subject to erosion-corrosion, rated to 140°F (60°C) continuous immersion.

1003657

Fast-drying protective coating that shields battery terminals, posts and hold-downs from corrosion.

1003892

Long-term flexible waxy corrosion inhibitor for metal, stored engine components and fasteners exposed to salt spray and high humidity.

1003659

High-performance coating of over 93% pure zinc that actively fights rust and corrosion on damaged galvanized surfaces.

10610

Aluminum-filled epoxy putty for non-rusting repairs to aluminum castings and HVAC components.

Brushable Ceramic Blue

Low-viscosity, alumina-filled brushable epoxy coating providing a smooth protective barrier against wear, erosion and corrosion to 350°F.

Ceramic Repair Putty

High-performance, trowelable ceramic-filled epoxy putty for rebuilding pump casings and equipment worn by corrosion and erosion.

10780

Alumina-filled epoxy putty that hardens in 5 minutes for emergency repairs to leaking pipes.

15820

Trowelable urethane compound that cures to a tough rubber for lining and repairing equipment exposed to abrasion and impact.

10210

Steel-filled liquid epoxy for casting over models, holding fixtures and light-gauge forming dies.

Plastic Steel Putty (A)

The original steel-filled epoxy putty for economical, dependable metal maintenance and repair.

Titanium Putty

High-tech, titanium-reinforced epoxy putty for critical repairs of machinery, bearing housings and scored shafts up to 350°F.

Semi-gloss paint for brake calipers and drums, heat resistant up to 150°C (302°F), resistant to wheel acid and brake fluid.

Fast-drying semi-gloss heat-resistant paint up to 300°C (572°F), ideal for engine parts and as an undercoat for texture paint.

Heat-resistant textured red aerosol paint up to 300°C (572°F), ideal for engine covers.

High quality heat-resistant aerosol paint that withstands up to 600°C (1112°F), with excellent coverage.

EA 3463

Steel-filled, kneadable epoxy putty stick that cures in 10 minutes, even underwater, for emergency metal repairs.

EA 3471

Non-sagging, steel-reinforced epoxy repair putty that cures to a machinable, metal-like finish.

EA 3472

Steel-filled, pourable epoxy compound for casting into hard-to-reach areas and rebuilding worn machinery parts.

EA 3475

Aluminum-filled epoxy repair putty with a non-rusting finish for worn and damaged machinery.

EA 3476

Stainless steel-filled epoxy repair putty for a corrosion-resistant, machinable finish on pumps, shafts and castings.

EA 3478

Ferro-silicon-filled epoxy repair compound, highly resistant to corrosion, abrasion and chemical attack.

PC 7222

Trowelable epoxy putty that renews badly worn metal surfaces without sagging or shrinking.

PC 7228

White, self-leveling ceramic epoxy topcoat for fine-particle abrasion and corrosion protection.

PC 7234

Ultra smooth ceramic-reinforced epoxy coating for wear and corrosion protection, -29 to 288°C.

PC 7255

Sprayable, low-friction ceramic epoxy coating that rebuilds and protects pumps, valves and process equipment from wear and corrosion.

Repair compound for sealing leaks and reinforcing damaged pipework.

SF 7505

Water-based latex coating for pipes and valves that stops rust and withstands continuous heat up to 90°C.

SF 754

Fast-drying rust treatment that stops corrosion and primes rusted metal for a finish coat.

SF 7900

Silicone-free ceramic coating that prevents weld spatter from adhering to equipment for up to 8 hours.

7400

Water-based, air-cured MoS2/graphite dry-film coating for permanent lubrication of metal-to-metal friction pairs.

D-3484

Heat-hardening MoS2/graphite coating for permanent lubrication of metal-to-metal friction pairs under slow to moderate speeds.

D-96

Water-based, air-curing dry-film coating offering constant, low friction and anti-squeak performance for interior trim components.

80370

Aerosol coating that seals battery terminals to eliminate acid salt corrosion and extend battery life.

80335

Waterproof, non-shrinking sealer for holes and leaks in mufflers and tailpipes, resisting temperatures to 2000°F.

81849

One-step spray or brush-on treatment that encapsulates old rust and prevents new rust, leaving a paintable black polymer coating.

10012085

Abrasion-resistant alkyd-based aluminium pigment coating for universal corrosion protection and touch-up of metal surfaces, up to about +300°C.

10000321

Brushable zinc metal-pigment coating for cathodic corrosion protection of frames, gates, poles and machine parts, with 98.5% pure zinc pigment.

10000157

TÜV-tested waxy protective film for indoor and outdoor storage of metal parts.

10018047

Pasty, fast-curing 2-component epoxy for bonding metal parts, resistant to temperatures up to +180°C.

10007785

Gap-filling two-component epoxy for repairs, resistant to +180°C, with strong adhesion even on vertical surfaces.

Repair Stick Aluminium

Non-corrosive, fast-curing, aluminium-filled epoxy putty for quick metal repairs, companion to Repair Stick Steel.

Repair Stick Steel

Fast-curing, steel-filled epoxy repair putty with NSF drinking water approval for metal repairs.

10047458

Epoxy-based spray that neutralises rust and forms a black base coat in one process, for indoor and outdoor use.

10021353

Ferric-oxide surface coating giving corrosion- and weather-resistant protection; passed 2000+ hours of salt-spray testing.

10000139

Acrylic resin coating with stainless steel pigments for repairing damaged stainless parts, resistant up to +300°C.

W 44 T

5-in-1 multifunctional spray combining corrosion protection, lubrication, water repellency and cleaning.

WEICON WL

Liquid, self-levelling ceramic-filled epoxy coating with high adhesion to stainless steel for wear and corrosion protection.

10000016

Fast-drying, paintable zinc-flake spray for long-lasting cathodic corrosion protection, with more than 1,050 hours of salt spray resistance.

10000048

Fast-drying, colour-matching anti-corrosion spray for repairing hot-dip galvanized parts and coating welds and drill holes.

425

Dead-soft aluminum foil tape (4.6 mil total) with acrylic adhesive for heat shielding, sealing, masking and moisture barriers, -54°C to 149°C, UL 723 Class L.

PTFE sealing tape for threaded pipe and fitting connections.

130C

Self-fusing EPDM rubber splicing tape providing void-free, moisture-sealed primary insulation for cables up to 69 kV.

2228

65 mil self-fusing rubber mastic tape for insulating, moisture-sealing and padding cable connections up to 1,000 V and bus bars up to 35 kV.

23

30 mil self-fusing rubber splicing tape for low and high voltage joints up to 69 kV, rated to 90°C continuous.

Super 33+

Premium-grade vinyl electrical tape rated to 600V, stretching up to 250% for high-adhesion splice insulation indoors and outdoors.

Super 33+

Professional-grade vinyl electrical tape for primary insulation on wires and cables up to 600V.

Super 88

All-weather professional-grade vinyl electrical tape for primary insulation on splices up to 600 V (UL) / 1,000 V (CSA), flame retardant and sunlight resistant.

35

Premium-grade 7 mil vinyl electrical tape for splices up to 600 V and fade-resistant colour coding, rated -10°C to 105°C, in ten colours.

50

All-weather 10 mil black PVC corrosion protection tape with high-tack rubber adhesive for pipes, conduits and fittings, -48°C to 80°C, UV- and chemical-resistant.

165

6 mil flame-retardant PVC electrical tape for splices up to 600 V, rated 19°F to 194°F (-7°C to 90°C), in ten colours.

4926

Thin, versatile double-sided acrylic foam tape for smooth, seamless panel and trim bonding.

4941

Versatile double-sided acrylic foam tape bonding high and medium surface energy substrates like metals and glass.

4991

Thick double-sided acrylic foam tape for gap-filling bonds on uneven or dissimilar surfaces.

5952

Heavy-duty double-sided acrylic foam tape for bonding painted and powder-coated surfaces without curing time.

VHB 5952

High-strength double-sided acrylic foam tape, 45 mil thick, for bonding on painted and powder-coated surfaces with no cure time.

471

Vivid-colour vinyl tape for floor marking and colour-coded surface protection.

Self-fusing silicone tape for emergency pipe and cable repairs.

Cubitron II 982C

Precision-Shaped Grain ceramic fibre disc with up to twice the cut-rate and life of other fibre discs on carbon steel.

7447

Flexible non-woven hand pad with very fine aluminium oxide abrasive for general purpose cleaning, finishing, blending and scuffing without shredding or rusting.

Roloc Clean and Strip

Silicon carbide non-woven disc that removes paint and rust without altering workpiece geometry.

30241-AA

NSF A1 registered biodegradable foam cleaner for general cleaning in the food industry.

31553-AA

Fast-drying solvent degreaser that leaves zero residue.

31891-AA

Foaming universal gasket stripper that works in under 20 minutes.

31557-AD

High flash point (>62°C) solvent degreaser for electronic and aviation components.

33284-AA

Non-flammable solvent contact cleaner for servicing critical electronics that cannot be de-energised.

05021

Solvent spray that loosens carbon deposits and removes conventional and formed-in-place gaskets.

14424

NSF C1 registered cleaner and polish that removes dirt, fingerprints and watermarks, leaving a streak-free shine.

1003457

Quick-drying, 99% pure isopropyl alcohol precision cleaner that dissolves grease, dust, lint, oils and flux and leaves no residue, NSF K1/K2 registered.

PF Precision Cleaner

Fast-evaporating, residue-free precision electronics cleaner, NSF K2 registered and safe on all plastics.

SF 7063

Colorless, residue-free solvent cleaner for pre-bonding surface preparation and degreasing.

SF 7070

General-purpose cleaner that removes oils and greases from plastic parts before bonding without stress cracking.

SKC-S

AMS 2644 Class 2 non-halogenated solvent cleaner for NDT pre-cleaning and removing excess penetrant, leaves no residue.

10053469

All-purpose alcohol-based cleaner with citrus peel extract and over 75% isopropanol for metals, plastics, glass, ceramic and coated surfaces.

10000147

Fast-evaporating, residue-free degreasing spray for metals, ceramics, glass and most plastics; silicone-free and non-chlorinated.

10000144

Phosphate- and formaldehyde-free foam cleaner for residue-free cleaning of metal, plastic, glass and ceramic surfaces.

10019559

Residue-free evaporating cleaner and degreaser for sensitive surfaces such as plastics, rubber and powder-coated metal parts.

10026705

Solvent spray that removes cured sealants, adhesives, paints and lacquers, even cured cyanoacrylate and anaerobic adhesives, from vertical surfaces.

Stainless Steel Care Spray

Antistatic cleaning and protection spray for matt and polished stainless steel surfaces, silicone-free.

Surface Cleaner

Fast-evaporating, residue-free cleaner for pre-treating bonding surfaces before adhesives and sealants.

Acetone (dimethyl ketone), 99.5% min technical grade, fast-evaporating solvent for cleaning, degreasing, resins, coatings and adhesives.

Potassium hydroxide (KOH) solid flakes, 90% min, for potassium soaps, alkaline batteries, agrochemicals, potassium salts and chemical manufacture.

Sodium hydroxide (NaOH) solid flakes, 98-99% min, white, for soap, detergents, textiles, water treatment, paper and chemical manufacture.

Sodium hydroxide (NaOH) solid pearls, 99% min, free-flowing 0.6-0.9 mm beads that dissolve quickly, for soap, detergents, water treatment and chemical manufacture.

Sodium hydroxide (NaOH) 50% liquid, membrane-cell grade, for pH control, water treatment, pulp and paper, detergents, textiles and chemical manufacture.

Citric acid anhydrous crystals, 99.5% min, for descaling, cleaning, water treatment, chelating and food/industrial formulations.

Diethylene glycol (DEG), 99.0% min industrial grade, for resins, plasticisers, gas dehydration, solvents and chemical manufacture. Not for food or medicine.

Ethyl acetate, 99.5% min ester solvent for coatings, inks, adhesives, packaging, extraction and cleaning.

Glacial acetic acid (CH3COOH), 99%+ technical grade, for chemical manufacture, solvents, textiles, descaling and pH control.

Glycerin (glycerol), 99.5% USP grade, for personal care, pharmaceuticals, food, resins, lubricants and chemical manufacture.

Technical-grade hydrochloric acid (HCl) solution, about 31-33%, for pickling, descaling, pH control and chemical processing.

Stabilised hydrogen peroxide (H2O2) solution, about 50%, for bleaching, disinfection, water and wastewater treatment and chemical manufacture. Strong oxidiser.

Isopropyl alcohol (2-propanol), 99.9% min, low-water solvent for cleaning, electronics, coatings and chemical manufacture.

Methanol (methyl alcohol), 99.85 wt% min, for formaldehyde, solvents, antifreeze, biodiesel and chemical manufacture. Toxic and highly flammable.

MEK (2-butanone), 99.5% min, strong fast-evaporating ketone solvent for coatings, inks, adhesives, resins and cleaning.

Monoethylene glycol (MEG), 99.9% min, for polyester/PET, antifreeze and coolants, heat-transfer fluids and chemical manufacture.

n-Butyl acetate, 99.5% min slower-evaporating ester solvent for lacquers, coatings, inks, thinners and adhesives.

Nitric acid (HNO3), about 68%, strong oxidising acid for metal treatment, passivation, etching and chemical manufacture.

Phosphoric acid (H3PO4), about 85%, for rust conversion, metal treatment, cleaning, water treatment and fertiliser/chemical manufacture.

Monopropylene glycol (propylene glycol), 99.5% min USP/EP grade, for food, pharma, cosmetics, antifreeze and heat-transfer applications.

Dense sodium carbonate (Na2CO3), 99.2-99.6% min white powder for glass, detergents, water treatment pH control and chemical manufacture.

Sodium hypochlorite solution, about 12.5% (available chlorine), for disinfection, bleaching, water treatment and cleaning. Corrosive; never mix with acids.

Concentrated sulfuric acid (H2SO4), 98% min, for chemical manufacture, fertiliser, battery electrolyte, pickling and dehydrating uses.

Toluene (methylbenzene) aromatic solvent for paints, coatings, adhesives and chemical manufacture, available to ASTM D841 nitration-grade requirements.

Mixed xylenes (dimethylbenzene), aromatic solvent with a 137-143°C boiling range for paints, coatings, inks, adhesives and chemical manufacture.