TP Worlds
Loctite

Loctite SF 7452 Activator for Cyanoacrylate Adhesives

SF 7452

Overview

Loctite SF 7452 is an organic-disulphide activator in acetone for increasing the cure speed of cyanoacrylate adhesives. It can be applied before or after the adhesive and is especially suited to post-application for rapid fixturing. Typical uses include securing wires or coils to PCBs, tamper-proofing adjustable components and mounting stand-offs. Drying time about 30 seconds and on-part life 5 minutes at 23°C. Qualified to Commercial Item Description A-A-3097 (regional approval).

Specifications

Base Type
Organic disulphide in acetone
Certifications
A-A-3097 (regional)

Technical Information

  • Specific gravity 0.79 at 23°C; viscosity 0.4 mPa·s
  • Drying time 30 seconds; on-part life 5 minutes
  • Pre- or post-application

Typical Applications

  • Speeding up cure of cyanoacrylate bonds
  • Securing wires and coils to PCBs
  • Tamper-proofing and stand-off mounting

Industries

ElectronicsGeneral IndustrialMachinery & Equipment

Technical Documents

Related Products

Loctite SF 7387 acrylic adhesive activatorLoctite

Loctite SF 7387 Acrylic Adhesive Activator

SF 7387

Low-viscosity activator that initiates cure of Loctite toughened acrylic structural adhesives, including AA 330.

Loctite SF 7455 General-Purpose Instant Adhesive AcceleratorLoctite

Loctite SF 7455 General-Purpose Instant Adhesive Accelerator

SF 7455

Colorless amine accelerator that speeds curing of Loctite cyanoacrylate adhesives, ideal for post-application.

Loctite SF 7471 primer TLoctite

Loctite SF 7471 Primer T

SF 7471

Acetone-based cure activator for anaerobic adhesives, enhancing fixture speed on passive metals and inert surfaces.

Loctite SF 7649 primer and activatorLoctite

Loctite SF 7649 Primer & Activator

SF 7649

Solvent-based activator that speeds cure of anaerobic adhesives and sealants on passive metals and in cold conditions.

Loctite SF 770 primerLoctite

Loctite SF 770 Primer

SF 770

Adhesion promoter for bonding low-energy plastics like polypropylene and polyethylene with instant adhesives.

3M Tape Primer 943M

3M Tape Primer 94

Primer 94

Solvent-based adhesion promoter improving tape, film and vinyl graphics bonding to low-energy plastics and metals.

Permatex Surface Prep Anaerobic ActivatorPermatex

Permatex Surface Prep Anaerobic Activator

24163

Aerosol activator that speeds the cure of Permatex anaerobic threadlockers, thread sealants, retaining compounds and gasket makers by 50%, also a general-purpose cleaning solvent.

Loctite 221 low strength threadlockerLoctite

Loctite 221 Threadlocker

221

Low-strength, low-viscosity threadlocker for small screws and long engagement fasteners.