3M Tape Primer 94
Primer 94
Overview
3M Tape Primer 94 can be used to improve the overall adhesion of tape, film and vinyl graphics to polyethylene, polypropylene, ABS, PET/PBT blends, concrete, wood, glass, metal and painted metal surfaces, commonly used for increasing adhesion of film and vinyl graphics in automotive detailing and to promote adhesion of 3M VHB Tape. It can be applied with a brush or swab for small areas and a pressurized flow gun for larger areas, dries to a clear finish usually within 5 minutes at room temperature, and cleans up with isopropyl alcohol.
Specifications
- Base Type
- Solvent-based adhesion promoter
- Service Temperature
- -40°C to +100°C application
- Certifications
- SCAQMD
Technical Information
- Improves adhesion on difficult-to-stick-to substrates
- Dries to clear finish in 5 minutes
- Cleans up with isopropyl alcohol
Typical Applications
- Promoting adhesion of 3M VHB Tape
- Automotive film and vinyl graphics detailing
- Priming plastic, rubber, painted and bare metal substrates
Industries
Technical Documents
Technical documents (TDS/SDS) are available on request — contact us and we'll send what's available for this product.
Ask a Technical QuestionRelated Products
LoctiteLoctite SF 7387 Acrylic Adhesive Activator
SF 7387
Low-viscosity activator that initiates cure of Loctite toughened acrylic structural adhesives, including AA 330.
LoctiteLoctite SF 7452 Activator for Cyanoacrylate Adhesives
SF 7452
Acetone-based activator that accelerates cure of cyanoacrylate adhesives.
LoctiteLoctite SF 7455 General-Purpose Instant Adhesive Accelerator
SF 7455
Colorless amine accelerator that speeds curing of Loctite cyanoacrylate adhesives, ideal for post-application.
LoctiteLoctite SF 7471 Primer T
SF 7471
Acetone-based cure activator for anaerobic adhesives, enhancing fixture speed on passive metals and inert surfaces.
LoctiteLoctite SF 7649 Primer & Activator
SF 7649
Solvent-based activator that speeds cure of anaerobic adhesives and sealants on passive metals and in cold conditions.
LoctiteLoctite SF 770 Primer
SF 770
Adhesion promoter for bonding low-energy plastics like polypropylene and polyethylene with instant adhesives.
PermatexPermatex Surface Prep Anaerobic Activator
24163
Aerosol activator that speeds the cure of Permatex anaerobic threadlockers, thread sealants, retaining compounds and gasket makers by 50%, also a general-purpose cleaning solvent.
3M3M Fire Barrier Moldable Putty Stix MP+
MP+
One-part, re-enterable intumescent putty stick for firestopping penetrations and blank openings, tested up to 4 hours.