MP+

One-part, re-enterable intumescent putty stick for firestopping penetrations and blank openings, tested up to 4 hours.

CP 25WB+

One-component, latex-based intumescent firestop sealant tested for through-penetrations up to 4 hours.

IC 15WB+

Yellow one-part, latex-based intumescent firestop sealant tested for through-penetrations up to 3 hours.

Fire Barrier 2000+

Elastomeric, neutral-cure firestop sealant giving up to 4-hour fire protection and an acoustic barrier for construction joints.

3000 WT

Intumescent silicone elastomeric firestop sealant that is also water-tight, tested for through-penetrations up to 4 hours, suited to CPVC piping.

Hi-Strength 90

Fast-drying, high-strength contact-type spray adhesive that bonds laminate, wood, metal, plastic and fabric.

3764

Clear, fast-setting thermoplastic hot melt stick for bonding plastics including polyethylene and polypropylene, flexible at low temperature.

4000 UV

Medium-strength, UV-resistant, color-stable one-part marine sealant for portholes, deck fittings and rub rails that still allows disassembly.

4200FC

Fast-curing polyurethane marine sealant bonding wood, fiberglass, gelcoat, plastics and metal above and below the waterline.

DP100

Fast-curing, high-flow clear epoxy for general-purpose structural bonding with a 5-minute work life.

DP420

Toughened two-part epoxy with high impact and fatigue resistance for demanding structural bonds.

DP460

High-performance toughened epoxy with outstanding shear and peel strength for critical bonding applications.

DP8005

Two-part acrylic adhesive that bonds low surface energy plastics like polypropylene without surface prep.

2214 Hi-Temp New Formula

One-part, heat-curing, aluminium-filled modified epoxy paste for bonding metals and high-temperature plastics, -55°C to 177°C, fully cured in 60 minutes at 121°C.

DP100 Plus

Fast-setting, self-leveling two-part epoxy with high shear and peel strength that stays clear when cured.

DP105

Very flexible, fast-setting 1:1 two-part epoxy that cures clear for invisible bond lines, with 5-minute work life.

DP110 Gray

Flexible, fast-setting two-part 1:1 epoxy with 10-minute work life and handling strength in about 20 minutes.

DP125

Two-part epoxy for metal, ceramics, stone, wood and many plastics with up to 25 minutes of open time.

EC-2216 B/A

Flexible, room-temperature curing two-part epoxy for aerospace-grade bonding, usable at cryogenic temperatures.

DP270 Black

Two-part, 1:1, low-viscosity epoxy potting compound and adhesive for sealing and encapsulating electronic components, 70-minute work life, negligible exotherm, UL 94 HB.

DP490

Black, non-sag two-part epoxy structural adhesive with a 90-minute working time.

DP810

Toughened, low-odor, non-flammable 1:1 acrylic for bonding oily metals, plastics and composites with 10-minute work life.

DP8805NS

Two-part, toughened, low-odor and non-flammable 10:1 acrylic structural adhesive with a 3-5 minute work life and structural strength in 8-10 minutes.

EC-1300L

Fast-drying, solvent-based contact adhesive bonding rubber, fabric, foam, metal and wood veneer with high immediate strength.

EZ250030

One-component moisture-curing polyurethane reactive (PUR) adhesive with 120-second open time and 30-second set, 100% solids with no VOCs.

DP8010

Two-part acrylic adhesive bonding low surface energy plastics such as polypropylene and polyethylene without surface treatment.

DP640

Two-part, 1:1, non-sag urethane adhesive with tough, flexible bonds, a 40-minute work life, especially good on wood and abraded plastics.

Super 77

Fast-drying, aggressive-tack spray adhesive with high-solids content that bonds a wide range of lightweight materials.

Primer 94

Solvent-based adhesion promoter improving tape, film and vinyl graphics bonding to low-energy plastics and metals.

31624-AA

Fast-tack multi-purpose spray adhesive that bonds almost any material to most hard surfaces.

1004788

General-purpose clear RTV silicone for sealing, bonding and waterproofing, with a barely visible, water-tight seal.

14277

Ultra-fast-curing thixotropic epoxy gel that fills gaps and bonds metal, glass, ceramics and wood in seconds.

2 Ton Epoxy

Extremely strong, clear, water-resistant structural epoxy adhesive that self-levels and cures without shrinking.

5 Minute Epoxy

Rapid-curing, general-purpose two-part epoxy adhesive that bonds metals, glass, ceramics, concrete and wood.

3145

High-strength, non-flowing MIL-A-46146 RTV silicone adhesive/sealant for electronics and aerospace assembly, high tensile strength and elongation with enhanced thermal stability.

732

General-purpose acetoxy-cure RTV silicone sealant/adhesive for industrial sealing and bonding, stable from -60°C to +180°C with excellent dielectric properties.

Advanced Formulation

Solvent-free, non-setting gasket dressing and flange sealant, a mobile version of Universal Blue for close-fitting flanges.

Aerograde PL32

Rolls-Royce approved, NATO stock number non-setting gasket compound for aeronautical turbines.

M

Non-setting, non-hardening universal jointing compound, -50°C to +250°C, in three grades.

Universal Blue

Non-setting, non-hardening polyester urethane gasket compound resistant to fuels, oils and coolants from -50°C to +250°C.

Instant Gasket

Acetoxy curing engineering-grade RTV silicone sealant with large gap-filling properties.

221

Low-strength, low-viscosity threadlocker for small screws and long engagement fasteners.

222

Low-strength threadlocker for small fasteners that need to stay easily removable.

225

Medium-strength threadlocker for fasteners requiring normal disassembly with hand tools.

2400

Medium-strength threadlocker suited to stainless steel and plated fasteners.

242

Medium-strength threadlocker for general-purpose fastener locking, removable with hand tools.

243

Medium-strength threadlocker for securing and sealing threaded fasteners.

245

Medium-strength threadlocker for locking and sealing fasteners removable with hand tools.

246

Medium strength, thixotropic threadlocker for heavy duty fasteners exposed to elevated temperatures.

248

Medium-strength threadlocker in a no-drip stick applicator, no primer needed.

262

Medium-to-high strength threadlocker for permanent locking of large bolts and studs.

263

High-strength threadlocker for heavy-duty fasteners, oil-tolerant.

266

High-strength, high-temperature threadlocker for heavy-duty fasteners exposed to shock and vibration.

268

High-strength threadlocker in a no-drip stick applicator.

270

High-strength threadlocker for permanent locking of heavy-duty fasteners, oil-tolerant.

2700

High-strength, permanent threadlocker for fasteners that will not be disassembled.

2701

High-strength threadlocker for inactive substrates and hot-oil resistance.

271

High-strength threadlocker for permanent locking of fasteners up to 1 inch in diameter.

275

High-strength threadlocker for permanent locking of large bolts and studs (M25 and larger).

276

Fast-curing, high-strength threadlocker for permanent locking, minimal activator needed.

278

High-strength, high-temperature threadlocker for coated or plated fasteners.

290

Wicking-grade threadlocker that flows into pre-assembled fasteners without disassembly.

3090

Fast-curing, two-component gel adhesive that fills gaps up to 5 mm on plastics, rubbers and metals.

380

Low viscosity, rubber-toughened black instant adhesive for tight fitting parts with excellent impact strength.

401

Fast-curing cyanoacrylate instant adhesive for small parts and general bonding.

402

Fast-fixturing, high-temperature instant adhesive with strong humidity resistance.

403

Low-odor, low-bloom instant adhesive for applications where vapor control matters.

406

Low-viscosity instant adhesive for very fast fixturing on plastics and rubbers.

415

General purpose methyl cyanoacrylate instant adhesive, particularly suited to metal bonding.

416

General purpose ethyl cyanoacrylate instant adhesive for plastics, rubbers and metals.

4203

Elastomer-toughened instant adhesive with improved heat and humidity resistance.

4304

UV/visible light curing instant adhesive for very rapid fixturing and surface cure.

435

Rubber-toughened instant adhesive with higher flexibility, peel strength and shock resistance.

454

Gel-consistency instant adhesive that won't run on vertical surfaces.

460

Low odor, low blooming instant adhesive for metals, plastics and elastomers.

480

Rubber-toughened black instant adhesive with high peel and impact strength.

493

Very low viscosity methyl cyanoacrylate general purpose adhesive for metal substrates.

495

General-purpose, fast-fixturing instant adhesive for plastics, rubbers and metals.

496

Very low-viscosity instant adhesive particularly suited to bonding metal substrates.

510

High-temperature, chemical-resistant anaerobic flange sealant for close-fitting rigid metal flanges.

515

Form-in-place anaerobic flange sealant for rigid machined metal flanges in pumps, compressors and transmissions.

518

Anaerobic flange sealant for rigid, close-fitting metal flanges.

5188

Highly flexible anaerobic form-in-place gasket for rigid metal flanges, tolerant of minor oil contamination.

542

Fast-curing, medium-strength thread sealant for fine-threaded hydraulic and pneumatic fittings.

545

High-lubricity thread sealant for easy assembly of fine-threaded hydraulic and pneumatic fittings.

55

Polyamide thread sealing cord for an immediate, full-pressure seal on metal and plastic pipe threads.

561

Self-feeding applicator stick for sealing pre-torqued metal pipes and fittings; NSF/ANSI 61.

565

Controlled-torque strength thread sealant for an instant low-pressure seal on tapered metal pipe threads.

567

General-purpose, high-temperature thread sealant for an instant low-pressure seal on tapered metal pipe threads.

572

Medium strength, thixotropic paste sealant for metal pipes and fittings.

574

Instant-seal anaerobic flange sealant with high oil and water/glycol resistance for gearbox and engine casings.

577

Medium-strength, general-purpose thread sealant for straight-to-straight and straight-to-taper fittings.

592

High-temperature thread sealant rated to 204°C, for pipe threads and fittings up to 400°F.

601

Low viscosity, high strength anaerobic for bonding cylindrical fitting parts.

603

High-strength retaining compound for cylindrical parts where clean surfaces can't be assured.

609

High-strength retaining compound for bushings, sleeves and rotor-to-shaft assemblies.

620

High-temperature retaining compound for wider bond gaps, up to 232°C (450°F).

638

High-strength, oil-tolerant retaining compound for wider bond gaps.

641

Medium-strength retaining compound for cylindrical parts that require future disassembly.

648

High-strength, fast-curing retaining compound for gears, sprockets and rotors.

660

Gap-filling retaining compound paste for restoring worn shafts and bearing seats.

680

High-strength retaining compound for cylindrical parts, certified for potable water systems.

AA 326

2-step, no-mix acrylic adhesive with fast cure and 15 N/mm2 shear strength, ideal for magnet bonding.

AA 330

Multipurpose, no-mix structural acrylic adhesive for bonding dissimilar substrates including metals and plastics.

EA 3450

Two-component 1:1 epoxy that cures rapidly at room temperature; metal bonding and gap filling.

9460

Non-sag, thixotropic gray epoxy for bonding dissimilar substrates including metals and engineering thermoplastics.

EA 9466

Two-component, room-temperature curing epoxy with extended 60-minute working life and high peel strength.

EA E-00CL

Clear, fast-setting general purpose epoxy for structural bonding, potting and encapsulating.

EA E-05CL

Ultra-clear, toughened epoxy with excellent peel resistance and low shrinkage for structural bonding.

EA E-05MR

General-purpose, gap-filling clear epoxy adhesive for high-strength bonds on rough or poorly fitting surfaces.

EA E-120HP

High-viscosity epoxy with a 120-minute work life for peel- and impact-resistant structural bonding.

EA E-20HP

High impact- and humidity-resistant structural epoxy for demanding metal-to-metal and magnet bonding.

EA E-30CL

Ultra-clear, low-viscosity 2-part epoxy for potting, bonding and staking optical and electrical assemblies.

EA E-60HP

Toughened, extended work-life epoxy adhesive for general-purpose industrial structural bonding.

HY 4090

Fast-fixturing hybrid epoxy-cyanoacrylate adhesive combining speed and structural strength for gap-filling bonds.

SF 7387

Low-viscosity activator that initiates cure of Loctite toughened acrylic structural adhesives, including AA 330.

SF 7452

Acetone-based activator that accelerates cure of cyanoacrylate adhesives.

SF 7455

Colorless amine accelerator that speeds curing of Loctite cyanoacrylate adhesives, ideal for post-application.

SF 7471

Acetone-based cure activator for anaerobic adhesives, enhancing fixture speed on passive metals and inert surfaces.

SF 7649

Solvent-based activator that speeds cure of anaerobic adhesives and sealants on passive metals and in cold conditions.

SF 770

Adhesion promoter for bonding low-energy plastics like polypropylene and polyethylene with instant adhesives.

SI 5145

Non-corrosive, neutral-cure silicone for bonding, sealing and coating electronic devices from -50°C to 200°C.

SI 5331

NSF-registered acetoxy silicone thread sealant for plastic pipe fittings carrying hot or cold water.

SI 5366

Clear acetoxy RTV silicone for sealing, bonding and protection, up to 250°C.

SI 5699

Flexible, moisture-cure RTV silicone gasket maker with oil and water/glycol resistance for transmission flanges.

SI 5900

Heavy-bodied, moisture-cure RTV silicone flange sealant with excellent oil resistance and large gap fill.

SI 5920

High-temperature RTV silicone gasket maker rated to 350°C, for flexible flanges and electrical insulation.

SI 595

Clear, general-purpose RTV silicone sealant for flexible bonding and sealing up to 204°C.

SI 596

Red, flowable RTV silicone sealant rated to 316°C for furnaces, ovens, boilers and exhaust systems.

SI 5970

Black RTV silicone gasketing sealant with excellent engine oil resistance.

Anaerobic Gasket Maker

Medium-strength, thixotropic anaerobic gasket maker that cures between close-fitting aluminum surfaces, NSF White Book registered.

80019

Slow-drying, non-hardening brush-top sealant approved for aviation and automotive use.

68050

OEM-specified, high-strength, medium-viscosity anaerobic adhesive for slip-fit assemblies, 2,800 PSI shear strength on steel, fixtures in 10 minutes.

80050

General purpose, waterproof, flexible clear RTV sealant for indoor/outdoor use, -75°F to 400°F.

80697

Fast-drying metallic copper spray sealant that dissipates heat and fills surface imperfections; -50°F to 500°F.

80016

Slow-drying, non-hardening sealant for dressing cut gaskets, approved for aviation and automotive use.

56521

PTFE-containing thread sealant formulated for metal tapered pipe thread fittings; replaces Teflon tape and pipe dopes and cures rapidly to withstand up to 10,000 PSI.

80062

All-purpose, fast-drying brush-on sealant that dries to a highly tacky, non-brittle film and resists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane.

59235

PTFE-containing thread sealant that locks and seals fittings, repositionable up to 4 hours after application.

27240

High-temperature, high-strength red threadlocker for permanent locking of studs and press fits, adds 3,000 PSI holding power and suits temperatures up to 450°F (232°C).

27140

High strength threadlocker for heavy-duty 3/8" to 1" fasteners, studs and press fits.

24240

All-purpose medium strength threadlocker for 1/4" to 3/4" nuts and bolts, removable with hand tools.

27037

Maximum flex, maximum oil resistant RTV that peels off by hand, 15% stronger and 60% more flexible than Ultra Black.

29000

Low viscosity threadlocker that wicks along threads of preassembled fasteners after assembly.

80045

Universal sealant that lubricates and seals threaded joints on water, oil and fuel lines.

49450

Fast setting instant adhesive that forms a long-lasting, gap-filling bond on non-porous surfaces.

24163

Aerosol activator that speeds the cure of Permatex anaerobic threadlockers, thread sealants, retaining compounds and gasket makers by 50%, also a general-purpose cleaning solvent.

85224

Formed-in-place elastomeric gasket that fully cures in 1 minute, for high oil-resistance applications.

80632

Economical general-purpose fitting sealant that outperforms tapes and pipe dopes.

Ultra Black

Sensor-safe RTV silicone gasket maker with improved oil resistance for oil pans, transmission pans and valve covers.

81878

High-temperature RTV gasket maker for turbocharger and exhaust applications, resists up to 700°F.

Ultra Grey

High-load, sensor-safe RTV silicone gasket maker for closely-spaced bolt patterns and OEM applications.

81630

Low-odor, sensor-safe RTV silicone gasket maker resisting temperatures up to 650°F for exhaust and high-heat applications.

22071

Coolant-resistant, sensor-safe RTV silicone formulated specifically for water pumps and thermostat housings.

81731

High-strength, waterproof yellow adhesive bonding rubber, metal, carpeting and vinyl upholstery, repositionable after installation.

Fix ALL High Tack

High-tack, neutral-cure SMX hybrid polymer adhesive/sealant with very high initial grab and up to 320 kg/10cm² end strength, reducing the need for support or clamping.

Silirub 2

Low-modulus, neutral-cure silicone joint sealant with excellent UV resistance and very high movement capability (±25%), for glazing and expansion joints.

TB1207B

Acetone-cure, black RTV silicone liquid gasket for powertrain and flange sealing, resistant to vibration, heat and automotive fluids.

TB1215

Oxime-cure, grey RTV silicone liquid gasket with high pressure resistance for powertrain and flange sealing.

Aluminium Minute Adhesive

Fast-curing, aluminium-filled structural epoxy adhesive for bonding aluminium and light metals, machinable after cure.

Black-Seal Special Silicone

High-temperature, oil- and grease-resistant black RTV silicone sealant, resistant to +280°C, for gearbox and engine sealing.

10016400

Black rubber-filled, high-viscosity, slow-curing instant adhesive with residual elasticity, resistant from -55°C to +140°C.

10019803

High-viscosity, slow-curing instant adhesive with residual elasticity, resistant from -55°C to +140°C, in a pen dosing system.

10031972

High-strength, extremely fast-curing, high-viscosity 1:1 polyurethane structural adhesive with a 90-second pot life, -55°C to +125°C, black.

10047457

Fast-curing 1:1 MMA structural adhesive that bonds low surface energy plastics such as PE and PP and EPDM, with 8-minute pot life.

10057686

Two-component epoxy resin adhesive resistant to +180°C, self-levelling with a very short pot life.

Flex 310 M

Silicone-free, ISEGA-certified elastic adhesive and sealant based on MS polymer for universal bonding.

10012994

Strong, permanently elastic 1C MS-polymer adhesive and sealant, free of silicone, isocyanate and solvents, -40°C to +90°C, ISEGA-certified for food technology.

10105067

Permanently elastic special sealant curing with air humidity, practically without shrinkage, in an eco-friendly cardboard Green Tube cartridge.

10005243

Red acetoxy-curing silicone sealant and adhesive for heat-exposed bonds and seals up to +300°C.

10026655

Patented 100% PTFE thread sealing cord for metal and plastic threads, -200°C to +240°C, non-flammable; one 175 m roll replaces up to 20 rolls of PTFE tape.

10047481

Water-based, non-hazardous, VOC-free lacquer for threadlocking, marking and sealing of screw connections, -80°C to +120°C, in red, yellow and green.

10016512

Moisture-resistant, high-viscosity alkoxy cyanoacrylate with longer curing time, odourless and little to no blooming, for clean, visually appealing bonds.

10031783

High-viscosity, medium-strength white anaerobic pipe and flange sealant with PTFE, classified as non-hazardous, with drinking-water approval, -60°C to +150°C.

10016416

Low-strength, low-viscosity violet threadlocker for easy disassembly, classified as non-hazardous, in a dosing pen.

10019968

Medium-strength, higher-viscosity blue anaerobic threadlocker for threads up to M36, -60°C to +200°C, with DVGW and drinking-water approvals; removable with normal tools.

AN 305-18

High-viscosity anaerobic flange sealant for filling large gaps with immediate sealing effect.

AN 306-41

Medium-strength, medium-viscosity anaerobic retaining compound for bearings, shafts and bushings, disassembles with normal tools.

10034150

High-strength, high-viscosity silver retaining compound for worn bearing rings and bushings, gap bridging up to 0.5 mm, -60°C to +150°C.