Acetone (dimethyl ketone), 99.5% min technical grade, fast-evaporating solvent for cleaning, degreasing, resins, coatings and adhesives.

Potassium hydroxide (KOH) solid flakes, 90% min, for potassium soaps, alkaline batteries, agrochemicals, potassium salts and chemical manufacture.

Sodium hydroxide (NaOH) solid flakes, 98-99% min, white, for soap, detergents, textiles, water treatment, paper and chemical manufacture.

Sodium hydroxide (NaOH) solid pearls, 99% min, free-flowing 0.6-0.9 mm beads that dissolve quickly, for soap, detergents, water treatment and chemical manufacture.

Sodium hydroxide (NaOH) 50% liquid, membrane-cell grade, for pH control, water treatment, pulp and paper, detergents, textiles and chemical manufacture.

Citric acid anhydrous crystals, 99.5% min, for descaling, cleaning, water treatment, chelating and food/industrial formulations.

Diethylene glycol (DEG), 99.0% min industrial grade, for resins, plasticisers, gas dehydration, solvents and chemical manufacture. Not for food or medicine.

Ethyl acetate, 99.5% min ester solvent for coatings, inks, adhesives, packaging, extraction and cleaning.

Glacial acetic acid (CH3COOH), 99%+ technical grade, for chemical manufacture, solvents, textiles, descaling and pH control.

Glycerin (glycerol), 99.5% USP grade, for personal care, pharmaceuticals, food, resins, lubricants and chemical manufacture.

Technical-grade hydrochloric acid (HCl) solution, about 31-33%, for pickling, descaling, pH control and chemical processing.

Stabilised hydrogen peroxide (H2O2) solution, about 50%, for bleaching, disinfection, water and wastewater treatment and chemical manufacture. Strong oxidiser.

Isopropyl alcohol (2-propanol), 99.9% min, low-water solvent for cleaning, electronics, coatings and chemical manufacture.

Methanol (methyl alcohol), 99.85 wt% min, for formaldehyde, solvents, antifreeze, biodiesel and chemical manufacture. Toxic and highly flammable.

MEK (2-butanone), 99.5% min, strong fast-evaporating ketone solvent for coatings, inks, adhesives, resins and cleaning.

Monoethylene glycol (MEG), 99.9% min, for polyester/PET, antifreeze and coolants, heat-transfer fluids and chemical manufacture.

n-Butyl acetate, 99.5% min slower-evaporating ester solvent for lacquers, coatings, inks, thinners and adhesives.

Nitric acid (HNO3), about 68%, strong oxidising acid for metal treatment, passivation, etching and chemical manufacture.

Phosphoric acid (H3PO4), about 85%, for rust conversion, metal treatment, cleaning, water treatment and fertiliser/chemical manufacture.

Monopropylene glycol (propylene glycol), 99.5% min USP/EP grade, for food, pharma, cosmetics, antifreeze and heat-transfer applications.

Dense sodium carbonate (Na2CO3), 99.2-99.6% min white powder for glass, detergents, water treatment pH control and chemical manufacture.

Sodium hypochlorite solution, about 12.5% (available chlorine), for disinfection, bleaching, water treatment and cleaning. Corrosive; never mix with acids.

Concentrated sulfuric acid (H2SO4), 98% min, for chemical manufacture, fertiliser, battery electrolyte, pickling and dehydrating uses.

Toluene (methylbenzene) aromatic solvent for paints, coatings, adhesives and chemical manufacture, available to ASTM D841 nitration-grade requirements.

Mixed xylenes (dimethylbenzene), aromatic solvent with a 137-143°C boiling range for paints, coatings, inks, adhesives and chemical manufacture.