2290

Solvent-based heat-cure epoxy coating for metal-to-metal lamination bonding with exceptionally high shear strength.

30291-AA

Zinc-rich protective coating spray for cold galvanising.

32379-AA

Fast-drying acrylic primer for repair and touch-up of painted surfaces with high UV resistance once cured.

31972-AA

Light green protective coating for mould tools that resists moisture, humidity and acid finger marking.

30298-AA

Multi-purpose zinc phosphate metal primer that promotes top-coat adhesion.

1111

Machinable, engineering-grade epoxy metal repair composite reinforced with silicon steel alloy, NSF/ANSI 61 certified.

1321

Non-machineable ceramic-filled epoxy resurfacing coating for metal surfaces subject to erosion-corrosion, rated to 140°F (60°C) continuous immersion.

1003657

Fast-drying protective coating that shields battery terminals, posts and hold-downs from corrosion.

1003892

Long-term flexible waxy corrosion inhibitor for metal, stored engine components and fasteners exposed to salt spray and high humidity.

1003659

High-performance coating of over 93% pure zinc that actively fights rust and corrosion on damaged galvanized surfaces.

10610

Aluminum-filled epoxy putty for non-rusting repairs to aluminum castings and HVAC components.

Brushable Ceramic Blue

Low-viscosity, alumina-filled brushable epoxy coating providing a smooth protective barrier against wear, erosion and corrosion to 350°F.

Ceramic Repair Putty

High-performance, trowelable ceramic-filled epoxy putty for rebuilding pump casings and equipment worn by corrosion and erosion.

10780

Alumina-filled epoxy putty that hardens in 5 minutes for emergency repairs to leaking pipes.

15820

Trowelable urethane compound that cures to a tough rubber for lining and repairing equipment exposed to abrasion and impact.

10210

Steel-filled liquid epoxy for casting over models, holding fixtures and light-gauge forming dies.

Plastic Steel Putty (A)

The original steel-filled epoxy putty for economical, dependable metal maintenance and repair.

Titanium Putty

High-tech, titanium-reinforced epoxy putty for critical repairs of machinery, bearing housings and scored shafts up to 350°F.

Semi-gloss paint for brake calipers and drums, heat resistant up to 150°C (302°F), resistant to wheel acid and brake fluid.

Fast-drying semi-gloss heat-resistant paint up to 300°C (572°F), ideal for engine parts and as an undercoat for texture paint.

Heat-resistant textured red aerosol paint up to 300°C (572°F), ideal for engine covers.

High quality heat-resistant aerosol paint that withstands up to 600°C (1112°F), with excellent coverage.

EA 3463

Steel-filled, kneadable epoxy putty stick that cures in 10 minutes, even underwater, for emergency metal repairs.

EA 3471

Non-sagging, steel-reinforced epoxy repair putty that cures to a machinable, metal-like finish.

EA 3472

Steel-filled, pourable epoxy compound for casting into hard-to-reach areas and rebuilding worn machinery parts.

EA 3475

Aluminum-filled epoxy repair putty with a non-rusting finish for worn and damaged machinery.

EA 3476

Stainless steel-filled epoxy repair putty for a corrosion-resistant, machinable finish on pumps, shafts and castings.

EA 3478

Ferro-silicon-filled epoxy repair compound, highly resistant to corrosion, abrasion and chemical attack.

PC 7222

Trowelable epoxy putty that renews badly worn metal surfaces without sagging or shrinking.

PC 7228

White, self-leveling ceramic epoxy topcoat for fine-particle abrasion and corrosion protection.

PC 7234

Ultra smooth ceramic-reinforced epoxy coating for wear and corrosion protection, -29 to 288°C.

PC 7255

Sprayable, low-friction ceramic epoxy coating that rebuilds and protects pumps, valves and process equipment from wear and corrosion.

Repair compound for sealing leaks and reinforcing damaged pipework.

SF 7505

Water-based latex coating for pipes and valves that stops rust and withstands continuous heat up to 90°C.

SF 754

Fast-drying rust treatment that stops corrosion and primes rusted metal for a finish coat.

SF 7900

Silicone-free ceramic coating that prevents weld spatter from adhering to equipment for up to 8 hours.

7400

Water-based, air-cured MoS2/graphite dry-film coating for permanent lubrication of metal-to-metal friction pairs.

D-3484

Heat-hardening MoS2/graphite coating for permanent lubrication of metal-to-metal friction pairs under slow to moderate speeds.

D-96

Water-based, air-curing dry-film coating offering constant, low friction and anti-squeak performance for interior trim components.

80370

Aerosol coating that seals battery terminals to eliminate acid salt corrosion and extend battery life.

80335

Waterproof, non-shrinking sealer for holes and leaks in mufflers and tailpipes, resisting temperatures to 2000°F.

81849

One-step spray or brush-on treatment that encapsulates old rust and prevents new rust, leaving a paintable black polymer coating.

10012085

Abrasion-resistant alkyd-based aluminium pigment coating for universal corrosion protection and touch-up of metal surfaces, up to about +300°C.

10000321

Brushable zinc metal-pigment coating for cathodic corrosion protection of frames, gates, poles and machine parts, with 98.5% pure zinc pigment.

10000157

TÜV-tested waxy protective film for indoor and outdoor storage of metal parts.

10018047

Pasty, fast-curing 2-component epoxy for bonding metal parts, resistant to temperatures up to +180°C.

10007785

Gap-filling two-component epoxy for repairs, resistant to +180°C, with strong adhesion even on vertical surfaces.

Repair Stick Aluminium

Non-corrosive, fast-curing, aluminium-filled epoxy putty for quick metal repairs, companion to Repair Stick Steel.

Repair Stick Steel

Fast-curing, steel-filled epoxy repair putty with NSF drinking water approval for metal repairs.

10047458

Epoxy-based spray that neutralises rust and forms a black base coat in one process, for indoor and outdoor use.

10021353

Ferric-oxide surface coating giving corrosion- and weather-resistant protection; passed 2000+ hours of salt-spray testing.

10000139

Acrylic resin coating with stainless steel pigments for repairing damaged stainless parts, resistant up to +300°C.

W 44 T

5-in-1 multifunctional spray combining corrosion protection, lubrication, water repellency and cleaning.

WEICON WL

Liquid, self-levelling ceramic-filled epoxy coating with high adhesion to stainless steel for wear and corrosion protection.

10000016

Fast-drying, paintable zinc-flake spray for long-lasting cathodic corrosion protection, with more than 1,050 hours of salt spray resistance.

10000048

Fast-drying, colour-matching anti-corrosion spray for repairing hot-dip galvanized parts and coating welds and drill holes.