Devcon Ceramic Repair Putty

Overview

Devcon Ceramic Repair Putty is a high-performance, trowelable, ceramic-filled epoxy for rebuilding worn or damaged equipment. It rebuilds worn pump casings and suction plates, repairs tube sheets, heat exchangers and other circulating water equipment, restores worn chutes and hoppers, and repairs and rebuilds butterfly and gate valves. It offers excellent chemical resistance and is corrosion-, cavitation- and erosion-resistant, with a non-sagging, creamy paste consistency that can be troweled up to 1/2 inch thick on vertical surfaces without sagging.

Specifications

Color

Dark Blue

Strength

High

Base Type

Epoxy, ceramic-filled

Cure Type

Room temperature cure; mix ratio 4.3:1 by volume

Service Temperature

Wet 150°F (65°C); Dry 350°F (177°C)

Fixture Time

Pot life 25 minutes at 75°F

Full Cure Time

Functional cure 16 hours

Certifications

Qualifies under Mil Spec DOD-C-24176B(SH) Type I & II

Technical Information

• Compressive strength 12,700 psi (87.5 MPa)
• Shore D hardness 86
• Adhesive tensile shear 2,000 psi (13.8 MPa)

Typical Applications

• Rebuilding worn pump casings and suction plates
• Repairing tube sheets and heat exchangers
• Restoring worn chutes, hoppers and gate valves

Industries

Technical Documents