Devcon Brushable Ceramic Blue

Overview

Devcon Brushable Ceramic Blue is a low-viscosity, alumina-filled, brushable epoxy compound that, when applied at a 15-20 mil coating, provides a smooth protective barrier against wear, abrasion, corrosion, erosion and chemical attack. It protects pump casings, impeller blades, gate valves, water boxes and fan blades, and rebuilds heat exchangers, tube sheets and other water-circulating equipment. Its low-friction surface reduces turbulence, wear and cavitation, and it offers outstanding chemical resistance to acids, solvents and alkalis up to 350°F.

Specifications

Color

Blue

Strength

High

Base Type

Epoxy, alumina-filled

Viscosity

32,000 cP (mixed)

Cure Type

Two-part epoxy, room temperature cure; mix ratio 3.4:1 by volume

Service Temperature

Wet 302°F (150°C); Dry 350°F (177°C)

Fixture Time

Pot life 40 minutes; hard dry 6 hours

Full Cure Time

Recoat time 1-6 hours

Certifications

Salt spray resistance 5,000 hours

Technical Information

• Compressive strength 13,200 psi (91 MPa)
• Shore D hardness 86
• Salt spray resistance 5,000 hours

Typical Applications

• Protecting pump casings, impeller blades and gate valves from wear
• Rebuilding heat exchangers and tube sheets
• Top-coating repaired metal surfaces exposed to erosion and corrosion

Industries

Technical Documents