3M

425

Dead-soft aluminum foil tape (4.6 mil total) with acrylic adhesive for heat shielding, sealing, masking and moisture barriers, -54°C to 149°C, UL 723 Class L.

Cubitron II 982C

Precision-Shaped Grain ceramic fibre disc with up to twice the cut-rate and life of other fibre discs on carbon steel.

7447

Flexible non-woven hand pad with very fine aluminium oxide abrasive for general purpose cleaning, finishing, blending and scuffing without shredding or rusting.

Roloc Clean and Strip

Silicon carbide non-woven disc that removes paint and rust without altering workpiece geometry.

MP+

One-part, re-enterable intumescent putty stick for firestopping penetrations and blank openings, tested up to 4 hours.

CP 25WB+

One-component, latex-based intumescent firestop sealant tested for through-penetrations up to 4 hours.

IC 15WB+

Yellow one-part, latex-based intumescent firestop sealant tested for through-penetrations up to 3 hours.

Hi-Strength 90

Fast-drying, high-strength contact-type spray adhesive that bonds laminate, wood, metal, plastic and fabric.

3764

Clear, fast-setting thermoplastic hot melt stick for bonding plastics including polyethylene and polypropylene, flexible at low temperature.

4000 UV

Medium-strength, UV-resistant, color-stable one-part marine sealant for portholes, deck fittings and rub rails that still allows disassembly.

EC-1300L

Fast-drying, solvent-based contact adhesive bonding rubber, fabric, foam, metal and wood veneer with high immediate strength.

Super 77

Fast-drying, aggressive-tack spray adhesive with high-solids content that bonds a wide range of lightweight materials.

Fire Barrier 2000+

Elastomeric, neutral-cure firestop sealant giving up to 4-hour fire protection and an acoustic barrier for construction joints.

3000 WT

Intumescent silicone elastomeric firestop sealant that is also water-tight, tested for through-penetrations up to 4 hours, suited to CPVC piping.

4200FC

Fast-curing polyurethane marine sealant bonding wood, fiberglass, gelcoat, plastics and metal above and below the waterline.

PTFE sealing tape for threaded pipe and fitting connections.

130C

Self-fusing EPDM rubber splicing tape providing void-free, moisture-sealed primary insulation for cables up to 69 kV.

2228

65 mil self-fusing rubber mastic tape for insulating, moisture-sealing and padding cable connections up to 1,000 V and bus bars up to 35 kV.

23

30 mil self-fusing rubber splicing tape for low and high voltage joints up to 69 kV, rated to 90°C continuous.

Super 33+

Professional-grade vinyl electrical tape for primary insulation on wires and cables up to 600V.

Super 33+

Premium-grade vinyl electrical tape rated to 600V, stretching up to 250% for high-adhesion splice insulation indoors and outdoors.

Super 88

All-weather professional-grade vinyl electrical tape for primary insulation on splices up to 600 V (UL) / 1,000 V (CSA), flame retardant and sunlight resistant.

35

Premium-grade 7 mil vinyl electrical tape for splices up to 600 V and fade-resistant colour coding, rated -10°C to 105°C, in ten colours.

165

6 mil flame-retardant PVC electrical tape for splices up to 600 V, rated 19°F to 194°F (-7°C to 90°C), in ten colours.

DP100

Fast-curing, high-flow clear epoxy for general-purpose structural bonding with a 5-minute work life.

DP420

Toughened two-part epoxy with high impact and fatigue resistance for demanding structural bonds.

DP460

High-performance toughened epoxy with outstanding shear and peel strength for critical bonding applications.

DP8005

Two-part acrylic adhesive that bonds low surface energy plastics like polypropylene without surface prep.

DP100 Plus

Fast-setting, self-leveling two-part epoxy with high shear and peel strength that stays clear when cured.

DP125

Two-part epoxy for metal, ceramics, stone, wood and many plastics with up to 25 minutes of open time.

EC-2216 B/A

Flexible, room-temperature curing two-part epoxy for aerospace-grade bonding, usable at cryogenic temperatures.

DP270 Black

Two-part, 1:1, low-viscosity epoxy potting compound and adhesive for sealing and encapsulating electronic components, 70-minute work life, negligible exotherm, UL 94 HB.

DP490

Black, non-sag two-part epoxy structural adhesive with a 90-minute working time.

DP810

Toughened, low-odor, non-flammable 1:1 acrylic for bonding oily metals, plastics and composites with 10-minute work life.

DP8805NS

Two-part, toughened, low-odor and non-flammable 10:1 acrylic structural adhesive with a 3-5 minute work life and structural strength in 8-10 minutes.

EZ250030

One-component moisture-curing polyurethane reactive (PUR) adhesive with 120-second open time and 30-second set, 100% solids with no VOCs.

DP8010

Two-part acrylic adhesive bonding low surface energy plastics such as polypropylene and polyethylene without surface treatment.

DP640

Two-part, 1:1, non-sag urethane adhesive with tough, flexible bonds, a 40-minute work life, especially good on wood and abraded plastics.

2214 Hi-Temp New Formula

One-part, heat-curing, aluminium-filled modified epoxy paste for bonding metals and high-temperature plastics, -55°C to 177°C, fully cured in 60 minutes at 121°C.

DP105

Very flexible, fast-setting 1:1 two-part epoxy that cures clear for invisible bond lines, with 5-minute work life.

DP110 Gray

Flexible, fast-setting two-part 1:1 epoxy with 10-minute work life and handling strength in about 20 minutes.

2290

Solvent-based heat-cure epoxy coating for metal-to-metal lamination bonding with exceptionally high shear strength.

50

All-weather 10 mil black PVC corrosion protection tape with high-tack rubber adhesive for pipes, conduits and fittings, -48°C to 80°C, UV- and chemical-resistant.

Primer 94

Solvent-based adhesion promoter improving tape, film and vinyl graphics bonding to low-energy plastics and metals.

4926

Thin, versatile double-sided acrylic foam tape for smooth, seamless panel and trim bonding.

4941

Versatile double-sided acrylic foam tape bonding high and medium surface energy substrates like metals and glass.

4991

Thick double-sided acrylic foam tape for gap-filling bonds on uneven or dissimilar surfaces.

VHB 5952

High-strength double-sided acrylic foam tape, 45 mil thick, for bonding on painted and powder-coated surfaces with no cure time.

5952

Heavy-duty double-sided acrylic foam tape for bonding painted and powder-coated surfaces without curing time.

471

Vivid-colour vinyl tape for floor marking and colour-coded surface protection.