Permatex

Anaerobic Gasket Maker

Medium-strength, thixotropic anaerobic gasket maker that cures between close-fitting aluminum surfaces, NSF White Book registered.

80019

Slow-drying, non-hardening brush-top sealant approved for aviation and automotive use.

80697

Fast-drying metallic copper spray sealant that dissipates heat and fills surface imperfections; -50°F to 500°F.

80016

Slow-drying, non-hardening sealant for dressing cut gaskets, approved for aviation and automotive use.

80062

All-purpose, fast-drying brush-on sealant that dries to a highly tacky, non-brittle film and resists gasoline, oil, antifreeze, axle lube, kerosene, propane and butane.

27037

Maximum flex, maximum oil resistant RTV that peels off by hand, 15% stronger and 60% more flexible than Ultra Black.

85224

Formed-in-place elastomeric gasket that fully cures in 1 minute, for high oil-resistance applications.

Ultra Black

Sensor-safe RTV silicone gasket maker with improved oil resistance for oil pans, transmission pans and valve covers.

81878

High-temperature RTV gasket maker for turbocharger and exhaust applications, resists up to 700°F.

Ultra Grey

High-load, sensor-safe RTV silicone gasket maker for closely-spaced bolt patterns and OEM applications.

81630

Low-odor, sensor-safe RTV silicone gasket maker resisting temperatures up to 650°F for exhaust and high-heat applications.

22071

Coolant-resistant, sensor-safe RTV silicone formulated specifically for water pumps and thermostat housings.

80078

Aluminium, copper and graphite anti-seize lubricant, -60°F to 1,600°F, ideal for marine use.

09128

Premium copper anti-seize and thread lubricant with micro-fine copper flakes in a semi-synthetic grease, for high-temperature seizing, corrosion and galling, -30°F to 1800°F.

77124

High-temperature nickel anti-seize for stainless steel and titanium, protecting up to 2,400°F.

80370

Aerosol coating that seals battery terminals to eliminate acid salt corrosion and extend battery life.

81849

One-step spray or brush-on treatment that encapsulates old rust and prevents new rust, leaving a paintable black polymer coating.

68050

OEM-specified, high-strength, medium-viscosity anaerobic adhesive for slip-fit assemblies, 2,800 PSI shear strength on steel, fixtures in 10 minutes.

24125

100% synthetic brake lubricant with ceramic solids that silences brake noise across a wide temperature range and will not wash out.

22058

Dielectric grease that protects electrical connections and spark plug boots from moisture and corrosion.

24112

Premium non-melting silicone brake lubricant fortified with ceramic solids that reduces noisy stops by 99% from -50°F to 3000°F.

24110

Green, non-melting, environmentally friendly 100% synthetic caliper lubricant that prevents seizing and squealing from -40°F to 400°F.

81950

Adhesive assembly lube that prevents scuffing and galling at initial start-up of new or rebuilt engines.

80075

Foaming chain lubricant that cleans, lubricates and protects roller chains, gears and cables.

80050

General purpose, waterproof, flexible clear RTV sealant for indoor/outdoor use, -75°F to 400°F.

81731

High-strength, waterproof yellow adhesive bonding rubber, metal, carpeting and vinyl upholstery, repositionable after installation.

82588

Fast-evaporating, noncorrosive cleaner for electrical and electronic devices that leaves no residue and is safe on all metals and most plastics.

56521

PTFE-containing thread sealant formulated for metal tapered pipe thread fittings; replaces Teflon tape and pipe dopes and cures rapidly to withstand up to 10,000 PSI.

59235

PTFE-containing thread sealant that locks and seals fittings, repositionable up to 4 hours after application.

80045

Universal sealant that lubricates and seals threaded joints on water, oil and fuel lines.

80632

Economical general-purpose fitting sealant that outperforms tapes and pipe dopes.

27240

High-temperature, high-strength red threadlocker for permanent locking of studs and press fits, adds 3,000 PSI holding power and suits temperatures up to 450°F (232°C).

27140

High strength threadlocker for heavy-duty 3/8" to 1" fasteners, studs and press fits.

24240

All-purpose medium strength threadlocker for 1/4" to 3/4" nuts and bolts, removable with hand tools.

29000

Low viscosity threadlocker that wicks along threads of preassembled fasteners after assembly.

80335

Waterproof, non-shrinking sealer for holes and leaks in mufflers and tailpipes, resisting temperatures to 2000°F.

82450

Non-chlorinated aerosol cleaner that penetrates, dissolves and removes dirt and oil from brake systems and metal parts, leaving no residue.

80070

High-silicone, non-gumming spray that lubricates and waterproofs mechanical equipment, stops squeaks and protects rubber, plastic and metal.

49450

Fast setting instant adhesive that forms a long-lasting, gap-filling bond on non-porous surfaces.

80052

Heavy-duty penetrating oil that works quickly to loosen rust, tar, grease, carbon deposits and corrosion and free frozen nuts, bolts and fittings.

24163

Aerosol activator that speeds the cure of Permatex anaerobic threadlockers, thread sealants, retaining compounds and gasket makers by 50%, also a general-purpose cleaning solvent.

80345

All-purpose white grease that minimises friction in metal-to-metal and metal-to-plastic contact while protecting against rust.