Permatex Ultra Disc Brake Caliper Lubricant (Synthetic)
24110
Overview
Permatex Ultra Disc Brake Caliper Lubricant is an environmentally friendly, green, non-melting, 100% synthetic lubricant. It is formulated to lubricate under the most adverse brake conditions, preventing seizing and sticking of disc brake components, and assures that critical metal-to-metal contact areas, caliper pins, sleeves, bushings and pistons, remain lubricated throughout the pad life. It prevents disc brake squealing and has a temperature range of -40°F to 400°F (-40°C to 204°C). Suggested applications from Permatex are caliper pins, hardware and the back-side of brake pads. It is supplied as an 8 oz (227 g) can (labelled Synthetic Brake Parts Lubricant, #24110).
Specifications
- Base Type
- 100% synthetic, non-melting
- Service Temperature
- -40°F to 400°F (-40°C to 204°C)
Technical Information
- Green, non-melting, environmentally friendly 100% synthetic
- Prevents seizing, sticking and squealing of disc brake components
- Temperature range -40°F to 400°F
Typical Applications
- Caliper pins, sleeves, bushings and pistons
- Brake hardware and the back-side of brake pads
- Preventing seizing and squealing of disc brake components
Industries
Technical Documents
Technical documents (TDS/SDS) are available on request — contact us and we'll send what's available for this product.
Ask a Technical QuestionRelated Products
PermatexPermatex Ceramic Extreme Brake Parts Lubricant
24125
100% synthetic brake lubricant with ceramic solids that silences brake noise across a wide temperature range and will not wash out.
PermatexPermatex Dielectric Tune-Up Grease
22058
Dielectric grease that protects electrical connections and spark plug boots from moisture and corrosion.
PermatexPermatex Silicone Brake Parts Lubricant
24112
Premium non-melting silicone brake lubricant fortified with ceramic solids that reduces noisy stops by 99% from -50°F to 3000°F.
PermatexPermatex Ultra Slick Engine Assembly Lube
81950
Adhesive assembly lube that prevents scuffing and galling at initial start-up of new or rebuilt engines.
AmbersilAmbersil Dry Moly Spray
31576-AA
Resin-bonded dry MoS2 lubricant film for high-load applications, -150 to +400°C.
AmbersilAmbersil Tufcut Foam Metal Cutting Lubricant (300 ml)
31582-AA
Foaming metal cutting lubricant that clings to vertical surfaces.
AmbersilAmbersil Tufcut Liquid Metal Cutting Oil (350 ml)
31580-AA
Ready-to-use metal cutting lubricant liquid with extreme-pressure additives, in a 350 ml applicator bottle.
AmbersilAmbersil Tufcut Metal Cutting Compound (500 g)
31581-AA
Traditional metal cutting paste with the performance of Tufcut liquid.