Ambersil Dry Moly Spray
31576-AA
Overview
Dry Moly Spray is a dry molybdenum disulphide lubricant for high-load applications where other lubricants would fail but a dry film is still required, and as a running-in treatment on rolling and sliding bearings. A tough, long-lasting resin-bonded film; multiple coats improve performance and light polishing of the final coat improves slip.
Specifications
- Base Type
- Dry MoS2 film, resin bonded
- Service Temperature
- -150 to +400°C
Technical Information
- Resin-bonded MoS2 dry film
- Wide range -150 to +400°C
- Code 31576-AA (12 x 400 ml)
Typical Applications
- High-load sliding surfaces
- Running-in of rolling and sliding bearings
- Applications needing a dry lubricant film
Industries
Technical Documents
Technical documents (TDS/SDS) are available on request — contact us and we'll send what's available for this product.
Ask a Technical QuestionRelated Products
AmbersilAmbersil Tufcut Foam Metal Cutting Lubricant (300 ml)
31582-AA
Foaming metal cutting lubricant that clings to vertical surfaces.
AmbersilAmbersil Tufcut Liquid Metal Cutting Oil (350 ml)
31580-AA
Ready-to-use metal cutting lubricant liquid with extreme-pressure additives, in a 350 ml applicator bottle.
AmbersilAmbersil Tufcut Metal Cutting Compound (500 g)
31581-AA
Traditional metal cutting paste with the performance of Tufcut liquid.
AmbersilAmbersil Tufcut Spray
31579-AA
Ready-to-use metal cutting lubricant spray with extreme-pressure additives for tough metals; NSF H2 registered.
Chesterton 610 Plus Synthetic Lubricating Fluid
610 Plus
Premium full-synthetic polyolester lubricating fluid for equipment operating from -25°C to over 270°C, self-cleaning and non-carbonizing where petroleum lubricants fail.
CRCCRC Dielectric Grease
1003199
Non-curing silicone compound for sealing, lubricating, protecting and insulating electrical connections; NSF H1 registered.
CRCCRC Dry Ceramic Lube
1003302
Micro-thin, dry non-tacky ceramic film lubricant for metal, wood, rubber, plastic and glass, working -40°F to 450°F, NSF H2 registered.
CRCCRC Dry Graphite Lube
1003362
Dry, non-petroleum graphite film lubricant for metal and rubber that handles 25,000 psi and 400°F continuous (850°F intermittent).