WEICONLOCK AN 305-18 Flange Sealing
AN 305-18
Overview
WEICONLOCK AN 305-18 is a one-component, high-viscosity anaerobic flange sealant that cures in the absence of air between two closely fitting metal surfaces. It fills large gaps with an immediate sealing effect, is high-temperature-resistant, and produces a hard-to-disassemble bond once fully cured. NSF S2 approved for use in non-food-contact areas.
Specifications
- Color
- Red, fluorescent
- Strength
- High
- Base Type
- Anaerobic methacrylate ester
- Viscosity
- 80,000-500,000 mPa·s (high viscosity)
- Cure Type
- Anaerobic (moisture/metal-ion cure, no air)
- Service Temperature
- -60°C to +200°C
- Fixture Time
- Handling strength 10-20 minutes
- Full Cure Time
- Final strength (100%) 3-6 hours
- Certifications
- NSF S2 (FDA 21 CFR)
Technical Information
- Gap bridging up to 0.5mm
- Shear strength 8-13 N/mm² (DIN 54452)
- Breakaway torque 12-18 Nm, prevail torque 18-24 Nm
Typical Applications
- Sealing large flange gaps up to 0.5mm
- Pump housing and gearbox flange assembly
- Pipe fitting and thread sealing
Industries
Technical Documents
Related Products
WEICONWEICON Gasket Maker (Black, Green Tube)
10105067
Permanently elastic special sealant curing with air humidity, practically without shrinkage, in an eco-friendly cardboard Green Tube cartridge.
HylomarHylomar Advanced Formulation
Advanced Formulation
Solvent-free, non-setting gasket dressing and flange sealant, a mobile version of Universal Blue for close-fitting flanges.
HylomarHylomar Aerograde PL32 Non-Setting Compound
Aerograde PL32
Rolls-Royce approved, NATO stock number non-setting gasket compound for aeronautical turbines.
HylomarHylomar M (Light, Medium, Heavy) Jointing Compound
M
Non-setting, non-hardening universal jointing compound, -50°C to +250°C, in three grades.
HylomarHylomar Universal Blue
Universal Blue
Non-setting, non-hardening polyester urethane gasket compound resistant to fuels, oils and coolants from -50°C to +250°C.
LoctiteLoctite 510 High-Temperature Flange Sealant
510
High-temperature, chemical-resistant anaerobic flange sealant for close-fitting rigid metal flanges.
LoctiteLoctite 515 Flange Sealant
515
Form-in-place anaerobic flange sealant for rigid machined metal flanges in pumps, compressors and transmissions.
LoctiteLoctite 518 Flange Sealant
518
Anaerobic flange sealant for rigid, close-fitting metal flanges.