MOLYKOTE PG-54 Plastislip Grease
PG-54
Overview
MOLYKOTE PG-54 Plastislip Grease is a silicone-oil-based grease with good high-pressure and corrosion protection properties, designed for the long-term lubrication of metal/plastic, plastic/plastic and reinforced rubber/oil-resistant and non-oil-resistant combinations. It suits low-friction operation of most rubber or plastic parts such as bearing bushings, gears and chains, sealing rings, sliding tracks and switches, and flexible control cables in Bowden cable systems, electric motors, gearboxes and automotive brake and clutch systems.
Specifications
- Base Type
- Silicone oil, lithium complex thickener
- Service Temperature
- -50°C to +180°C
Technical Information
- NLGI grade 2-3; base oil viscosity ≈200 cSt at 40°C
- PTFE solid lubricant
- Wide operating range -50°C to +180°C
Typical Applications
- Bearing bushings, gears and chains
- Sealing rings, sliding tracks and switches
- Bowden cables, automotive brake and clutch systems
Industries
Technical Documents
Technical documents (TDS/SDS) are available on request — contact us and we'll send what's available for this product.
Ask a Technical QuestionRelated Products
MolykoteMOLYKOTE 316 Silicone Release Fluid
316
Heat-stable silicone anti-stick agent, FDA 21 CFR 175.300 compliant, for food, rubber and machinery release applications.
MolykoteMOLYKOTE 33 Medium Extreme Low Temperature Grease
33 Medium
Silicone-based, lithium-thickened NLGI 2 grease for light-load metal-to-metal and metal-to-plastic friction over a very wide temperature range, from -73°C.
MolykoteMOLYKOTE 4 Electrical Insulating Compound
4 Electrical Insulating Compound
Silicone dielectric compound with semi-flowable consistency for sealing connectors, terminals and battery contacts; -54°C to +200°C.
MolykoteMOLYKOTE 55 O-Ring Grease
55 O-Ring Grease
Silicone-based lithium grease that seals and lubricates rubber O-rings and seals by slightly swelling them; -65°C to +175°C.
MolykoteMOLYKOTE AS-880N Grease
AS-880N
Silicone/silica grease with solid lubricants for brake noise and vibration damping between metal, plastic and shim surfaces.
MolykoteMOLYKOTE D-321 R Anti-Friction Coating Spray
D-321 R Spray
Air-curing dry-film lubricant in aerosol form with molybdenum disulfide and graphite for heavily loaded metal-to-metal sliding contacts, from -180°C to +450°C.
MolykoteMOLYKOTE HP-300 Grease
HP-300
Fully fluorinated PFPE grease for extreme, oxygen-rich or corrosive conditions, including hydrogen-exposed and cleanroom equipment.
MolykoteMOLYKOTE Longterm 2/78 G Grease
Longterm 2/78 G
Mineral oil lithium/zinc grease with solid lubricants and oxidation/corrosion inhibitors for long-term bearing and gear lubrication.