MOLYKOTE Longterm 2/78 G Grease
Longterm 2/78 G
Overview
MOLYKOTE Longterm 2/78 G Grease is a mineral oil, lithium/zinc soap grease containing specially formulated solid lubricants plus oxidation and corrosion inhibitors. It offers high load-carrying capability, a wide service temperature range, resistance to oxidation, good corrosion protection and long-term lubrication performance, and contains no intentional PTFE or PFAS. It suits plain and anti-friction bearings, guides and splined shafts, small gear units operating at slow speeds, bushings, sleeves, slides, guides and tracks.
Specifications
- Base Type
- Mineral oil, lithium/zinc grease with MoS2 (NLGI 2)
- Service Temperature
- -35°C to +130°C
Technical Information
- High load-carrying capability
- Wide service temperature range, resists oxidation
- No intentional PTFE/PFAS
Typical Applications
- Plain and anti-friction bearings
- Guides and splined shafts
- Small gear units at slow speeds
Industries
Technical Documents
Technical documents (TDS/SDS) are available on request — contact us and we'll send what's available for this product.
Ask a Technical QuestionRelated Products
MolykoteMOLYKOTE 316 Silicone Release Fluid
316
Heat-stable silicone anti-stick agent, FDA 21 CFR 175.300 compliant, for food, rubber and machinery release applications.
MolykoteMOLYKOTE 33 Medium Extreme Low Temperature Grease
33 Medium
Silicone-based, lithium-thickened NLGI 2 grease for light-load metal-to-metal and metal-to-plastic friction over a very wide temperature range, from -73°C.
MolykoteMOLYKOTE 4 Electrical Insulating Compound
4 Electrical Insulating Compound
Silicone dielectric compound with semi-flowable consistency for sealing connectors, terminals and battery contacts; -54°C to +200°C.
MolykoteMOLYKOTE 55 O-Ring Grease
55 O-Ring Grease
Silicone-based lithium grease that seals and lubricates rubber O-rings and seals by slightly swelling them; -65°C to +175°C.
MolykoteMOLYKOTE AS-880N Grease
AS-880N
Silicone/silica grease with solid lubricants for brake noise and vibration damping between metal, plastic and shim surfaces.
MolykoteMOLYKOTE D-321 R Anti-Friction Coating Spray
D-321 R Spray
Air-curing dry-film lubricant in aerosol form with molybdenum disulfide and graphite for heavily loaded metal-to-metal sliding contacts, from -180°C to +450°C.
MolykoteMOLYKOTE HP-300 Grease
HP-300
Fully fluorinated PFPE grease for extreme, oxygen-rich or corrosive conditions, including hydrogen-exposed and cleanroom equipment.
MolykoteMOLYKOTE PG-54 Plastislip Grease
PG-54
Silicone oil based grease with a wide temperature range for long-term lubrication of plastic and rubber parts.