WEICON Universal Spray-on Grease with MoS2
10019872
Overview
WEICON Universal Spray-on Grease with MoS2 is a high-pressure-resistant and strong long-term lubricant that reduces friction and wear over prolonged periods, temperature-resistant from -20 to +120°C. It suits rolling and slide bearings, joints, levers, sliding guides, spindles, camshafts, spline shafts, springs, exposed gears and worm gears, at all slide speeds permissible for grease lubrication, and is used in industrial and building sectors, rolling mills, machine tools, agricultural and construction machines, and road and rail vehicles.
Specifications
- Base Type
- MoS2 lubricating grease
- Service Temperature
- -20°C to +120°C
Technical Information
- High-pressure-resistant, strong adhesion
- Suitable for all slide speeds under grease lubrication
- Temperature range -20°C to +120°C
Typical Applications
- Rolling and slide bearings
- Exposed gears and worm gears
- Spindles, camshafts and spline shafts
Industries
Technical Documents
Technical documents (TDS/SDS) are available on request — contact us and we'll send what's available for this product.
Ask a Technical QuestionRelated Products
WEICON Anti-Friction Spray MoS2
10029748
Grease-free dry lubricant film with MoS2 for clean sliding lubrication from -200°C to +450°C.
WEICON Cutting Fluid
10053516
Mineral-oil-free, silicone-free high-performance cutting oil for drilling, turning, milling, sawing and thread cutting of steel, stainless steel and non-ferrous metals.
WEICON Pneuma-Lube
10010554
High-performance PTFE-containing lubricating oil for pneumatic tools and equipment, with corrosion protection, from -50°C to +210°C.
AmbersilAmbersil Dry Moly Spray
31576-AA
Resin-bonded dry MoS2 lubricant film for high-load applications, -150 to +400°C.
AmbersilAmbersil Tufcut Foam Metal Cutting Lubricant (300 ml)
31582-AA
Foaming metal cutting lubricant that clings to vertical surfaces.
AmbersilAmbersil Tufcut Liquid Metal Cutting Oil (350 ml)
31580-AA
Ready-to-use metal cutting lubricant liquid with extreme-pressure additives, in a 350 ml applicator bottle.
AmbersilAmbersil Tufcut Metal Cutting Compound (500 g)
31581-AA
Traditional metal cutting paste with the performance of Tufcut liquid.
AmbersilAmbersil Tufcut Spray
31579-AA
Ready-to-use metal cutting lubricant spray with extreme-pressure additives for tough metals; NSF H2 registered.