SKF LGEM 2 High Viscosity Grease with Solid Lubricants
LGEM 2
Overview
SKF LGEM 2 is a high viscosity, mineral oil based grease using a lithium/calcium soap. Its content of molybdenum disulphide and graphite provides extra protection for harsh applications subjected to high loads, heavy vibrations and slow rotations, offering high oxidation stability and continued lubrication even if the oil film breaks down. It suits rolling element bearings running at low speed and very high loads, jaw crushers, track laying machines, lift mast wheels and building machines such as mechanical rams, crane arms and crane hooks.
Specifications
- Base Type
- Mineral oil, lithium/calcium grease with MoS2 and graphite
- Service Temperature
- -20°C to +120°C
Technical Information
- High oxidation stability
- Continued lubrication if oil film breaks down
- Suited to jaw crushers, cranes and track machines
Typical Applications
- Rolling element bearings at low speed, very high loads
- Jaw crushers and track laying machines
- Crane arms, crane hooks and mechanical rams
Industries
Technical Documents
Technical documents (TDS/SDS) are available on request — contact us and we'll send what's available for this product.
Ask a Technical QuestionRelated Products
SKF LGGB 2 Biodegradable Bearing Grease
LGGB 2
Environmentally acceptable lubricant (EAL) with lithium/calcium thickener and ester base oil, -40°C to +90°C.
SKFSKF LGLT 2 Low Temperature Extremely High Speed Bearing Grease
LGLT 2
Fully synthetic (PAO) lithium grease for low temperatures down to -50°C and extremely high speeds, with low friction torque and quiet running.
AmbersilAmbersil Dry Moly Spray
31576-AA
Resin-bonded dry MoS2 lubricant film for high-load applications, -150 to +400°C.
AmbersilAmbersil Tufcut Foam Metal Cutting Lubricant (300 ml)
31582-AA
Foaming metal cutting lubricant that clings to vertical surfaces.
AmbersilAmbersil Tufcut Liquid Metal Cutting Oil (350 ml)
31580-AA
Ready-to-use metal cutting lubricant liquid with extreme-pressure additives, in a 350 ml applicator bottle.
AmbersilAmbersil Tufcut Metal Cutting Compound (500 g)
31581-AA
Traditional metal cutting paste with the performance of Tufcut liquid.
AmbersilAmbersil Tufcut Spray
31579-AA
Ready-to-use metal cutting lubricant spray with extreme-pressure additives for tough metals; NSF H2 registered.
Chesterton 610 Plus Synthetic Lubricating Fluid
610 Plus
Premium full-synthetic polyolester lubricating fluid for equipment operating from -25°C to over 270°C, self-cleaning and non-carbonizing where petroleum lubricants fail.