SKF LGGB 2 Biodegradable Bearing Grease
LGGB 2
Overview
SKF LGGB 2 is a biodegradable, low-toxicity grease that is an ISO 12924 Environmentally Acceptable Lubricant (EAL), with lithium/calcium thickener and an ester base oil, for -40°C to +90°C. It is tested and approved for steel-on-steel spherical plain bearings, ball bearings and roller bearings, and suits a wide range of applications where environmental contamination is a concern, such as agriculture, forestry, water treatment and construction.
Specifications
- Base Type
- Ester oil, lithium/calcium thickener
- Service Temperature
- -40°C to +90°C
- Certifications
- ISO 12924 Environmentally Acceptable Lubricant (EAL)
Technical Information
- NLGI grade 2; ISO 12924 EAL
- Low toxicity, biodegradable ester base oil
- Approved for plain, ball and roller bearings
Typical Applications
- Agriculture and forestry equipment
- Water treatment machinery
- Construction equipment
Industries
Technical Documents
Technical documents (TDS/SDS) are available on request — contact us and we'll send what's available for this product.
Ask a Technical QuestionRelated Products
SKFSKF LGEM 2 High Viscosity Grease with Solid Lubricants
LGEM 2
Lithium/calcium grease with molybdenum disulphide and graphite for harsh, high-load, slow-rotation applications like crushers and cranes.
SKFSKF LGLT 2 Low Temperature Extremely High Speed Bearing Grease
LGLT 2
Fully synthetic (PAO) lithium grease for low temperatures down to -50°C and extremely high speeds, with low friction torque and quiet running.
AmbersilAmbersil Dry Moly Spray
31576-AA
Resin-bonded dry MoS2 lubricant film for high-load applications, -150 to +400°C.
AmbersilAmbersil Tufcut Foam Metal Cutting Lubricant (300 ml)
31582-AA
Foaming metal cutting lubricant that clings to vertical surfaces.
AmbersilAmbersil Tufcut Liquid Metal Cutting Oil (350 ml)
31580-AA
Ready-to-use metal cutting lubricant liquid with extreme-pressure additives, in a 350 ml applicator bottle.
AmbersilAmbersil Tufcut Metal Cutting Compound (500 g)
31581-AA
Traditional metal cutting paste with the performance of Tufcut liquid.
AmbersilAmbersil Tufcut Spray
31579-AA
Ready-to-use metal cutting lubricant spray with extreme-pressure additives for tough metals; NSF H2 registered.
Chesterton 610 Plus Synthetic Lubricating Fluid
610 Plus
Premium full-synthetic polyolester lubricating fluid for equipment operating from -25°C to over 270°C, self-cleaning and non-carbonizing where petroleum lubricants fail.