OKS 1110 Multi-Silicone Grease
1110
Overview
OKS 1110 is a transparent silicone grease based on PDMS oil with an inorganic thickener, NLGI 3, for -40 to +200°C. It is NSF H1 registered (124381), holds drinking-water approvals (UBA / ACS) and is beer-foam tested. Available from 4 g tubes up to 180 kg drums.
Specifications
- Color
- Transparent
- Base Type
- Silicone (PDMS) oil, inorganic thickener
- Service Temperature
- -40 to +200°C
- Certifications
- NSF H1 (124381), UBA / ACS drinking-water approvals, DIN 51825 MSI3S-40
Technical Information
- NLGI 3; density 0.96 g/cm³
- Base oil viscosity 9,500 mm²/s at 40°C
- Beer-foam tested
Typical Applications
- Seals, gaskets and O-rings
- Valves and fittings in drinking-water and food plants
- Plastic and rubber parts, sliding and switching elements
Industries
Technical Documents
Related Products
AmbersilAmbersil Dry Moly Spray
31576-AA
Resin-bonded dry MoS2 lubricant film for high-load applications, -150 to +400°C.
AmbersilAmbersil Tufcut Foam Metal Cutting Lubricant (300 ml)
31582-AA
Foaming metal cutting lubricant that clings to vertical surfaces.
AmbersilAmbersil Tufcut Liquid Metal Cutting Oil (350 ml)
31580-AA
Ready-to-use metal cutting lubricant liquid with extreme-pressure additives, in a 350 ml applicator bottle.
AmbersilAmbersil Tufcut Metal Cutting Compound (500 g)
31581-AA
Traditional metal cutting paste with the performance of Tufcut liquid.
AmbersilAmbersil Tufcut Spray
31579-AA
Ready-to-use metal cutting lubricant spray with extreme-pressure additives for tough metals; NSF H2 registered.
Chesterton 610 Plus Synthetic Lubricating Fluid
610 Plus
Premium full-synthetic polyolester lubricating fluid for equipment operating from -25°C to over 270°C, self-cleaning and non-carbonizing where petroleum lubricants fail.
CRCCRC Dielectric Grease
1003199
Non-curing silicone compound for sealing, lubricating, protecting and insulating electrical connections; NSF H1 registered.
CRCCRC Dry Ceramic Lube
1003302
Micro-thin, dry non-tacky ceramic film lubricant for metal, wood, rubber, plastic and glass, working -40°F to 450°F, NSF H2 registered.