44 Medium

Silicone-based lithium grease for high-temperature bearings, low evaporation and superior oxidation resistance; -40°C to +204°C.

41

Carbon-black-thickened silicone grease that does not melt even at extreme temperatures; -20°C to +290°C.

LGHC 2

Calcium sulphonate complex grease for high loads, heavy water exposure and high temperatures in cement, mining and metals.

L 55/2

PFPE-based high-temperature long-term grease (NLGI 2) for bearings and guides operating up to 260°C, resistant to aggressive chemicals; NSF H1 registered.

AL-H

NSF H1-approved, odourless food-grade grease for bearings, joints and linear guide systems.

Black-Seal Special Silicone

High-temperature, oil- and grease-resistant black RTV silicone sealant, resistant to +280°C, for gearbox and engine sealing.

BEM 41-141

Lithium-soap grease (NLGI 1) for rolling and plain bearings subject to high loads and vibration, especially wind turbine rotor, generator and pitch bearings.

LB 8102

High-temperature EP grease for rolling and plain bearings, gears and slideways under heavy load.

LB 8103

Black MoS2 grease for heavy-load, vibration-prone bearings and joints up to 250°C.

LGHP 2

Polyurea-thickened mineral oil grease for extremely long life at high temperatures in electric motors and industrial fans.

LGHB 2

Calcium sulphonate complex grease for extreme loads and peak temperatures up to 200°C, widely used in cement, mining and steel.

LGWA 2

Premium lithium complex EP grease for loads or temperatures beyond general purpose greases, from -30°C to +140°C.

LGET 2

PTFE-thickened fluorinated (PFPE) grease for extremely high temperatures from 200°C up to 260°C in aggressive environments.

LGLT 2

Fully synthetic (PAO) lithium grease for low temperatures down to -50°C and extremely high speeds, with low friction torque and quiet running.

Gadus S3 V220C 2

Premium multipurpose red lithium complex EP grease for high-temperature, heavily loaded bearings (NLGI 2, dropping point 260°C).

004131

Synthetic hydrocarbon grease with a barium complex soap for high-speed, high-load bearings, low temperatures and precision gears, -50°C to +120°C.

BEM 41-132

Long-term lithium-soap grease (synthetic hydrocarbon + mineral oil) for rolling bearings at temperatures up to 150°C.

1140

Black NLGI 2 phenylmethyl-silicone grease for -20 to +290°C.

31585-AA

NSF H1 translucent NLGI 2 silicone grease for bearings up to +220°C.

30239-AA

High-temperature copper anti-seize paste, -30 to +1,100°C, lead and nickel free.

3452

Fluorosilicone grease resistant to solvents, acids and chlorides, for -29°C to +232°C service.

SL35610

NSF H1 registered NLGI 2 synthetic grease with a very high dropping point, for food processing equipment.

RENOLIT LX 2

EP high-temperature multipurpose grease based on lithium complex soap for long-term lubrication.

10019872

High-pressure-resistant long-term lubricant with MoS2 for bearings, joints and open gears, -20 to +120°C.

LGFQ 2

NSF H1, Halal and Kosher certified synthetic grease for high loads and wet, fluctuating-temperature food and beverage environments.

LGWM 2

Synthetic-mineral calcium sulphonate complex grease for high loads, wet environments and fluctuating temperatures.

LGED 2

NSF H1 certified PTFE-thickened fluorinated grease for extreme temperatures up to 240°C and aggressive chemical environments.

Longterm 2/78 G

Mineral oil lithium/zinc grease with solid lubricants and oxidation/corrosion inhibitors for long-term bearing and gear lubrication.

10029748

Grease-free dry lubricant film with MoS2 for clean sliding lubrication from -200°C to +450°C.

10018599

High-temperature long-term grease (NLGI 2) for roller and slide bearings, joints and spindles up to +190°C.

10016735

Long-life NLGI 2 lithium/calcium grease with MoS2 and high adhesive strength for roller and slide bearings, open gears and worm gears.

09128

Premium copper anti-seize and thread lubricant with micro-fine copper flakes in a semi-synthetic grease, for high-temperature seizing, corrosion and galling, -30°F to 1800°F.

1007931

NSF H1 registered, NLGI #2 high-performance grease with extreme-pressure and corrosion resistance for food plant machinery, -20°F to 400°F.